Draytek Vigor2860 Series User Manual page 751

opwd
pauth
ovj
okey
ometh
sch
rcallb
ikeid
For Dial-In Settings
itype
"oname=admin" means to set Username = admin.
It means Dial-Out Password
"opwd=1234" means to set Password = 1234.
It means PPP Authentication.
"pauth=pc" means to set PPP Authentication =
PAP&CHAP.
"pauth=p" means to set PPP Authentication = PAP Only
It means VJ Compression.
"ovj=on/off" means to enable/disable VJ Compression.
It means IKE Pre-Shared Key.
"okey=abcd" means to set IKE Pre-Shared Key = abcd.
It means IPSec Security Method.
"ometh=ah/" means AH.
"ometh=espd/espda/" means ESP DES without/with
Authentication.
"ometh=esp3/esp3a/" means ESP 3DES without/with
Authentication.
"ometh=espa/espaa" means ESP AES without/with
Authentication.
It means Index(1-15) in Schedule Setup.
sch=1,3,5,7 Set schedule 1->3->5->7
It means Require Remote to Callback.
"rcallb=on/off" means to enable/disable Set Require
Remote to Callback.
It means IKE Local ID.
"ikeid=vigor" means Set Local ID = vigor.
It means Allowed Dial-In Type. Available settings
include:
"itype=t" means PPTP.
737
Vigor2860 Series User's Guide