Telnet Command: Ip6 Mngt - Draytek Vigor2860 Series User Manual

> ip6 radvd -s 1 1800
> ip6 radvd -V
% IPv6 Radvd Config:
Radvd : Enable, Default Lifetime : 1800 seconds
T e l n e t C o m m
T e l n e t C o m m
This command allows you to manage the settings for access list.
ip6 mngt list
ip6 mngt list [add<index> <prefix> <prefix-length>|remove <index>|flush]
ip6 mngt status
ip6 mngt [http|telnet|ping|https|ssh] [on|off]
S y n t a x
S y n t a x
Parameter
list
status
add
index
prefix
prefix-length
remove
flush
http|telnet|ping|https|ss
h
on|off
E x a m p
E x a m p
> ip6 mngt list add 1 FE80::250:7FFF:FE12:1010 128
Vigor2860 Series User's Guide
a n d : i p 6 m n g t
a n d : i p 6 m n g t
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to show the setting information of the access
list.
It means to show the status of IPv6 management.
It means to add an IPv6 address which can be used to
execute management through Internet.
It means the number (1, 2 and 3) allowed to be
configured for IPv6 management.
It means to type the IPv6 address which will be used for
accessing Internet.
It means to type a fixed value as the length of the prefix.
It means to remove (delete) the specified index number
with IPv6 settings.
It means to clear the IPv6 access table.
These protocols are used for accessing Internet.
It means to enable (on) or disable (off) the Internet
accessing through http/telnet/ping.
l e
l e
622