Draytek Vigor2860 Series User Manual page 772

mode show
channel [number]
preamble [enable]
txburst [enable]
ssid[ssid_num enable
ssid_name
[hidden_ssid]]
Vigor2860 Series User's Guide
Available settings are: "11bgn", "11gn", "11n", "11bg",
"11g", or "11b".
It means to display what the current wireless mode is.
It means the channel of frequency of the wireless LAN.
The available settings are 0,1,2,3,4,5,6,7,8,9,10,11,12
and 13.
number=0, means Auto
number=1, means Channel 1
....
number=13, means Channel 13.
It means to define the length of the sync field in an
802.11 packet.
Most modern wireless network uses short preamble with
56 bit sync field instead of long preamble with 128 bit
sync field. However, some original 11b wireless network
devices only support long preamble.
0: disable to use long preamble.
1: enable to use long preamble.
It means to enhance the performance in data
transmission about 40%* more (by enabling Tx Burst).
It is active only when both sides of Access Point and
Station (in wireless client) invoke this function at the
same time.
0: disable the function.
1: enable the funciton.
It means to set the name of the SSID, hide the SSID if
required.
ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2,
SSID3 or SSID4.
ssid_name: Give a name for the specified SSID.
hidden_ssid: Type 0 to hide the SSID or 1 to display the
SSID
758