Telnet Command: Srv Nat Portmap - Draytek Vigor2860 Series User Manual

1. TCP
%% Status: Disable
%% Comment:
%% Private IP address: 0.0.0.0
Index Protocal
*****************************************************************
%% Status: Disable
%% Comment:
%% Private IP address: 0.0.0.0
Index Protocal
*****************************************************************
>
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to set port redirection table for NAT server.
srv nat portmap add [idx][serv name][proto][pub port][pri ip][pri port][wan1/wan2]
srv nat portmap del [idx]
srv nat portmap disable [idx]
srv nat portmap enable [idx] [proto]
srv nat portmap flush
srv nat portmap table
S y n t a x D e
S y n t a x D e
Parameter
Add[idx]
serv name
proto
pub port
pri ip
pri port
23
Start Port
Start Port
: s r v n a t p o r t m a
: s r v n a t p o r t m a
s c r i p t i o n
s c r i p t i o n
Description
It means to add a new port redirection table with an
index number. Available index number is from 1 to 10.
It means to type one name as service name.
It means to specify TCP or UDP as the protocol.
It means to specify which port can be redirected to the
specified Private IP and Port of the internal host.
It means to specify the private IP address of the internal
host providing the service.
It means to specify the private port number of the
service offered by the internal host.
83
End Port
End Port
p
p
701
Vigor2860 Series User's Guide