Telnet Command: Prn - Draytek Vigor2860 Series User Manual

S y n t a x
S y n t a x
Parameter
[<command>
<parameter>|...]
-t <sec>
-u <sec>
-i <sec>
-w <sec>
-s <sec>
-f
-l <List>
E x a m p
E x a m p
> portmaptime -t 86400 -u 300 -i 10
> portmaptime -l
------ Current setting ------
TCP Timeout
UDP Timeout
IGMP Timeout : 10 sec.
TCP WWW Timeout: 60 sec.
TCP SYN Timeout: 60 sec.
T e l n e t C o m m
T e l n e t C o m m
Vigor2860 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
l e
l e
: 86400 sec.
: 300 sec.
a n d : p r n
a n d : p r n
Description
The available commands with parameters are listed
below.
[...] means that you can type in several commands in
one line.
It means "TCP" protocol.
<sec>: Type a number to set the TCP session timeout.
It means "UDP" protocol.
<sec>: Type a number to set the UDP session timeout.
It means "IGMP" protocol.
<sec>: Type a number to set the IGMP session
timeout.
It means "TCP WWW" protocol.
<sec>: Type a number to set the TCP WWW session
timeout.
It means "TCP SYN" protocol.
<sec>: Type a number to set the TCP SYN session
timeout.
It means to flush all portmaps (useful for diagnostics).
List all settings.
674