Station Control; Ap Discovery - Draytek Vigor2860 Series User Manual

3 . 1 6 . 9 S t a t i o n
3 . 1 6 . 9 S t a t i o n
Station Control is used to specify the duration for the wireless client to connect and reconnect
Vigor router. If such function is not enabled, the wireless client can connect Vigor router until
the router shuts down.
Such feature is especially useful for free Wi-Fi service. For example, a coffee shop offers free
Wi-Fi service for its guests for one hour every day. Then, the connection time can be set as "1
hour" and reconnection time can be set as "1 day". Thus, the guest can finish his job within
one hour and will not occupy the wireless network for a long time.
Available settings are explained as follows:
Item
SSID
Enable
Connection Time /
Reconnection Time
Display All Station
Control List
WEB Portal Setup
After finishing all the settings here, please click OK to save the configuration.
3 . 1 6 . 1 0 A P D i
3 . 1 6 . 1 0 A P D
Vigor router can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage. Also, it can be
used to facilitate finding an AP for a WDS link. Notice that during the scanning process (about
5 seconds), no client is allowed to connect to Vigor.
This page is used to scan the existence of the APs on the wireless LAN. Yet, only the AP
which is in the same channel of this router can be found. Please click Scan to discover all the
connected APs.
Vigor2860 Series User's Guide
C o n t r o l
C o n t r o l
s c o v e r y
i s c o v e r y
Description
Display the SSID that the wireless station will use it to
connect with Vigor router.
Check the box to enable the station control function.
Use the drop down list to choose the duration for the wireless
client connecting /reconnecting to Vigor router. Or, type the
duration manually when you choose User defined.
All the wireless stations connecting to Vigor router by using
such SSID will be listed on Station Control List.
Click it to access in to LAN>>Web Portal Setup page for
modifying the settings if required.
388