Page 2 Vigor2860 Series VDSL2 Security Firewall User’s Guide Version: 1.0 Firmware Version: V3.7.1_RC5a (For future update, please visit DrayTek web site) Date: 22/02/2013 Vigor2860 Series User’s Guide...
Page 3 Web registration is preferred. You can register your Vigor router via Owner http://www.DrayTek.com. Firmware & Tools Due to the continuous evolution of DrayTek technology, all routers will be regularly Updates upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.
Page 4 Product: Vigor2860 Series Router DrayTek Corp. declares that Vigor2860 Series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC and RoHS 2011/65/EU The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
Page 5: Table Of Contents
2.8 Registering Vigor Router....................... 46 Web Configuration ..................51 3.1 WAN ............................51 3.1.1 Basics of Internet Protocol (IP) Network................. 51 3.1.2 General Setup......................... 53 3.1.3 Internet Access ....................... 60 3.1.4 Multi-PVCs........................88 3.1.5 Multi-VLAN........................94 3.1.6 Load-Balance Policy ....................... 97 Vigor2860 Series User’s Guide...
Page 6 3.8.3 Quality of Service......................203 3.9 Applications ......................... 210 3.9.1 Dynamic DNS ....................... 210 3.9.2 Schedule ........................213 3.9.3 RADIUS ........................215 3.9.4 LDAP /Active Directory Setup..................216 3.9.5 UPnP..........................220 3.9.6 IGMP..........................222 3.9.7 Wake on LAN........................ 223 Vigor2860 Series User’s Guide...
Page 7 3.15.4 User Password ......................314 3.15.5 Login Customization ....................316 3.15.6 Configuration Backup ....................317 3.15.7 Syslog/Mail Alert ......................319 3.15.8 Time and Date ......................322 3.15.9 Management....................... 323 3.15.10 Reboot System ......................325 3.15.11 Firmware Upgrade ....................326 Vigor2860 Series User’s Guide...
Page 8 5.1 Checking If the Hardware Status Is OK or Not..............409 5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ....410 5.3 Pinging the Router from Your Computer ................412 Vigor2860 Series User’s Guide viii...
Page 9 5.4 Checking If the ISP Settings are OK or Not ................ 413 5.5 Problems for 3G Network Connection ................413 5.6 Backing to Factory Default Setting If Necessary ..............414 5.7 Contacting Your Dealer ....................... 415 Vigor2860 Series User’s Guide...
Page 11: Introduction
Vigor2860 series is a VDSL2 router. It integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth. By adopting hardware-based VPN platform and hardware encryption of AES/DES/3DES, the router increases the performance of VPN greatly, and offers several protocols (such as IPSec/PPTP/L2TP) with up to 32 VPN tunnels.
Page 12: Led Indicators And Connectors
The port is connected with 1000Mbps. The port is connected with 10/100Mbps Left The port is connected. GigaLAN The port is disconnected. Blinking The data is transmitting. Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps Vigor2860 Series User’s Guide...
Page 13 Connecter for a USB device (for 3G USB Modem or printer). VDSL/ADSL Connecter for accessing the Internet. WAN2 Connecter for local network devices or modem for accessing Internet. GigaLAN (1-6) Connecters for local network devices. Connecter for a power adapter. Power Switch. ON/OFF Vigor2860 Series User’s Guide...
Page 14: For Vigor2860
The port is connected with 1000Mbps. The port is connected with 10/100Mbps Left The port is connected. GigaLAN The port is disconnected. Blinking The data is transmitting. Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps Vigor2860 Series User’s Guide...
Page 15 Connecter for a USB device (for 3G USB Modem or printer). VDSL/ADSL Connecter for accessing the Internet. WAN2 (Giga) Connecter for local network devices or modem for accessing Internet. GigaLAN (1-6) Connecters for local network devices. Connecter for a power adapter. ON/OFF Power Switch. Vigor2860 Series User’s Guide...
Page 16: Hardware Installation
Power on the device by pressing down the power switch on the rear panel. The system starts to initiate. After completing the system test, the ACT LED will light up and start blinking. (For the hardware connection, we take “n” model as an example.) Vigor2860 Series User’s Guide...
Page 17: Printer Installation
You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows XP/2000. For Windows 98/SE/Vista, please visit www.DrayTek.com. Before using it, please follow the steps below to configure settings for connected computers (or wireless clients).
Page 18 Open File->Add Printer. A welcome dialog will appear. Please click Next. Click Local printer attached to this computer and click Next. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port. Click Next. Vigor2860 Series User’s Guide...
Page 19 In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next. Click Standard and choose Generic Network Card. Then, in the following dialog, click Finish. Vigor2860 Series User’s Guide...
Page 20 11. Select "LPR" on Protocol, type p1 (number 1) as Queue Name. Then click OK. Next please refer to the red rectangle for choosing the correct protocol and LPR name. Vigor2860 Series User’s Guide...
Page 21 Note 1: Some printers with the fax/scanning or other additional functions are not supported. If you do not know whether your printer is supported or not, please visit www.draytek.com to find out the printer list. Open Support >FAQ/Application Notes; find out the link of USB>>Printer Server and click it.
Page 22 This page is left blank. Vigor2860 Series User’s Guide...
Page 23: Basic Settings
Please type “admin/admin” as the Username/Password and click Login. Notice: If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. Vigor2860 Series User’s Guide...
Page 24 The web page can be logged out according to the chosen condition. The default setting is Auto Logout, which means the web configuration system will logout after 5 minutes without any operation. Change the setting for your necessity. Vigor2860 Series User’s Guide...
Page 25: Changing Password
Now, the password has been changed. Next time, use the new password to access the Web user interface for this router. Note: Even the password is changed, the Username for logging to the web user interface is still “admin”. Vigor2860 Series User’s Guide...
Page 26: Quick Start Wizard
WAN1; if Ethernet interface is used, please choose WAN2; if 3G USB modem is used, please choose WAN3. Then click Next for next step. WAN1, WAN2 and WAN3 will bring up different configuration page. Refer to the following for detailed information. Vigor2860 Series User’s Guide...
Page 27: For Wan1 (Adsl/Vdsl)
Choose WAN1 as WAN Interface and click the Next button; you will get the following page. Available settings are explained as follows: Item Description Protocol There are two modes offered for you to choose for WAN1 interface. Vigor2860 Series User’s Guide...
Page 28 After finished the above settings, simply click Next. Manually enter the Username/Password provided by your ISP Available settings are explained as follows: Item Description User Name Assign a specific valid user name provided by the ISP. Vigor2860 Series User’s Guide...
Page 29 After finished the above settings, click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor2860 Series User’s Guide...
Page 30 VPI and VCI. Or, click Auto detect to find out the best values. Click Yes to enable Fixed IP feature. Fixed IP IP Address Type the IP address if Fixed IP is enabled. Subnet Mask Type the subnet mask. Vigor2860 Series User’s Guide...
Page 31 Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor2860 Series User’s Guide...
Page 32: For Wan2 (Ethernet)
ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next step. Choose WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. Vigor2860 Series User’s Guide...
Page 33 Click it to get into the next setting page. Cancel Click it to give up the quick start wizard. Please manually enter the Username/Password provided by your ISP. Click Next for viewing summary of such connection. Vigor2860 Series User’s Guide...
Page 34 Choose WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. Click PPTP/L2TP as the Internet Access Type. Then click Next to continue. Vigor2860 Series User’s Guide...
Page 35 Vigor2860 Series User’s Guide...
Page 36 Click it to get into the next setting page. Cancel Click it to give up the quick start wizard. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection. Vigor2860 Series User’s Guide...
Page 37 Choose WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. Click Static IP as the Internet Access type. Simply click Next to continue. Vigor2860 Series User’s Guide...
Page 38 Please type in the IP address information originally provided by your ISP. Then click Next for next step. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor2860 Series User’s Guide...
Page 39 Note: The maximum length of the host name you can set is 39 characters. Some Cable service providers specify a specific MAC address for access authentication. In such cases you need to enter the MAC address. Back Click it to return to previous setting page. Vigor2860 Series User’s Guide...
Page 40 After finished the settings above, click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor2860 Series User’s Guide...
Page 41: For Wan3 (Usb)
SIM Pin code –Type PIN code of the SIM card that will be used to access Internet. The maximum length of the pin (PPP mode) code you can set is 15 characters. Modem Initial String – Such value is used to initialize Vigor2860 Series User’s Guide...
Page 42 Then, click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor2860 Series User’s Guide...
Page 43: Service Activation Wizard
Service Activation Wizard is a tool which allows you to use trial version or update the license of WCF directly without accessing into the server (MyVigor) located on http://myvigor.draytek.com. For using Web Content Filter Profile, please refer to later section Web Content Filter Profile for detailed information.
Page 44 When you finish the selection, please click Next. Commtouch is the web content filter based on Commtouch operated in the worldwide. There is a 30-day trial period. After trial, you can purchase DrayTek's prepared Commtouch GlobalView WCF package from retailing outlets.
Page 45 Later, if you need to extend the license valid time for the same service, you can also use the Service Activation Wizard again to reach your goal by clicking the radio button of Formal edition with license key and clicking Next. Vigor2860 Series User’s Guide...
Page 46: Introducing Dashboard
Dashboard shows the connection status including System Information, IPv4 Internet Access, IPv6 Internet Access, Interface (physical connection), Security and Quick Access. Click Dashboard from the main menu on the left side of the main page. Vigor2860 Series User’s Guide...
Page 47 A web page with default selections will be displayed on the screen. Refer to the following figure: Vigor2860 Series User’s Guide...
Page 48: Virtual Panel
For detailed information about the LED display, refer to 1.2 LED Indicators and Connectors. A name with a link (e.g., Router Name, Current Time, WAN1 and etc.) below means you can click it to open the configuration page for modification. Vigor2860 Series User’s Guide...
Page 49: Quick Access For Common Used Menu
LAN are located on the bottom of this page. Scroll down the page to find them and use them if required. Note that there is a plus ( ) icon located on the left side of VPN/LAN. Click it to review the VPN connection(s) used presently. Vigor2860 Series User’s Guide...
Page 50: Gui Map
All the functions the router supports are listed with table clearly in this page. Users can click the function link to access into the setting page of the function for detailed configuration. Click the icon on the top of the main screen to display all the functions. Vigor2860 Series User’s Guide...
Page 51: Web Console
The functions/settings modified under Web Console also can be reviewed on the web user interface. Click the Web Console icon on the top of the main screen to open the following screen. Vigor2860 Series User’s Guide...
Page 52: Config Backup
Simply click the icon on the top of the main screen and a pop up dialog will appear. Click Save to store the setting. Such page displays the physical connection status such as LAN connection status, WAN connection status, ADSL information, and so on. Vigor2860 Series User’s Guide...
Page 53 Primary DNS-Displays the primary DNS server address for WAN interface. Secondary DNS -Displays the secondary DNS server address for WAN interface. IP Address-Displays the IP address of the LAN interface. TX Packets-Displays the total transmitted packets at the Vigor2860 Series User’s Guide...
Page 54 Mode - Displays the type of WAN connection (e.g., TSPC). Up Time - Displays the total uptime of the interface. IP - Displays the IP address of the WAN interface. Gateway IP - Displays the IP address of the default gateway. Vigor2860 Series User’s Guide...
Page 55: Virtual Wan
Each time you click OK on the web page for saving the configuration, you can find messages showing the system interaction with you. Ready indicates the system is ready for you to input settings. Settings Saved means your settings are saved once you click Finish or OK button. Vigor2860 Series User’s Guide...
Page 56: Registering Vigor Router
Please login the web configuration interface of Vigor router by typing “admin/admin” as User Name / Password. Click Support Area>>Production Registration from the home page. A Login page will be shown on the screen. Please type the account and password that you created previously. And click Login. Vigor2860 Series User’s Guide...
Page 57 (it appears when you click on the box of Registration Date). After adding the basic information for the router, please click Submit. When the following page appears, your router information has been added to the database. Now, you have finished the product registration. Vigor2860 Series User’s Guide...
Page 58 From the Device’s Service section, click the Trial. In the following page, check the box of “I have read and accept the above Agreement”. The system will find out the date for you to activate this version of service. Then, click Next. Vigor2860 Series User’s Guide...
Page 59 When this page appears, click Register. Wait for a moment until the following page appears. Click Close. Vigor2860 Series User’s Guide...
Page 60 This page is left blank. Vigor2860 Series User’s Guide...
Page 61: Web Configuration
These are known as private IP addresses, and are listed in the following ranges: From 10.0.0.0 to 10.255.255.255 From 172.16.0.0 to 172.31.255.255 From 192.168.0.0 to 192.168.255.255 Vigor2860 Series User’s Guide...
Page 62 Besides, 3G USB Modem in WAN3 also can be used as backup device. Therefore, when WAN1 and WAN2 are not available, the router will use 3.5G for supporting automatically. The supported 3G USB Modem will be listed on DrayTek web site. Please visit www.draytek.com for more detailed information.
Page 63: General Setup
Auto Weigh to let the router reach the best load balance. Index Click the WAN interface link under Index to access into the WAN configuration page. Enable V means such WAN interface is enabled and ready to be used. Vigor2860 Series User’s Guide...
Page 64 Available settings are explained as follows: Item Description Enable Choose Yes to invoke the settings for this WAN interface. Choose No to disable the settings for this WAN interface. Display Name Type the description for such interface. Vigor2860 Series User’s Guide...
Page 65 Disable – Disable the function of VLAN with tag. Tag value – Type the value as the VLAN ID number. The range is form 0 to 4095. Priority – Type the packet priority number for such VLAN. The range is from 0 to 7. Vigor2860 Series User’s Guide...
Page 66 When all of selected WAN disconnect – Such backup WAN will be activated only when all master WAN interfaces disconnect. After finished the above settings, click OK to save the settings. WAN2 is fixed with physical mode of Ethernet. Vigor2860 Series User’s Guide...
Page 67 Load Balance: Check this box to enable auto load balance function for such WAN interface. When the data traffic is large, the WAN interface with the function enabled will balance the data transmission automatically among all of the WAN interfaces in connection status. Vigor2860 Series User’s Guide...
Page 68 In such WAN interface, no type can be selected. Line Speed If your choose According to Line Speed as the Load Balance Mode, please type the line speed for downloading and uploading for such WAN interface. The unit is kbps. Vigor2860 Series User’s Guide...
Page 69 WAN will be activated when any master WAN interface disconnects. When all of selected WAN disconnect – Such backup WAN will be activated only when all master WAN interfaces disconnect. After finished the above settings, click OK to save the settings. Vigor2860 Series User’s Guide...
Page 70: Internet Access
Access Mode Use the drop down list to choose a proper access mode. The details page of that mode will be popped up. If not, click Details Page for accessing the page to configure the settings. Vigor2860 Series User’s Guide...
Page 71 Enter your allocated username, password and authentication ISP Access Setup parameters according to the information provided by your ISP. Username – Type in the username provided by ISP in this field. Password – Type in the password provided by ISP in this Vigor2860 Series User’s Guide...
Page 72 WAN interface, please use WAN IP Alias. You can set up to 8 public IP addresses other than the current one you are using. Fixed IP – Click Yes to use this function and type in a Vigor2860 Series User’s Guide...
Page 73 WAN Connection Such function allows you to verify whether network Detection connection is alive or not through ARP Detect or Ping Detect. Mode – Choose ARP Detect or Ping Detect for the system Vigor2860 Series User’s Guide...
Page 74 Domain Name – Type in the domain name that you have assigned. Specify an IP address – Click this radio button to specify some data. IP Address – Type in the private IP address. Subnet Mask – Type in the subnet mask. Vigor2860 Series User’s Guide...
Page 75 Disable – Click this radio button to close the connection through PPTP or L2TP. Server Address - Specify the IP address of the PPTP/L2TP server if you enable PPTP/L2TP client mode. Specify Gateway IP Address – Specify the gateway IP Vigor2860 Series User’s Guide...
Page 76 Fixed IP Address -Type a fixed IP address. WAN IP Network Obtain an IP address automatically – Click this button to Settings obtain the IP address automatically. Specify an IP address – Click this radio button to specify some data. Vigor2860 Series User’s Guide...
Page 77 PVCs. Select M-PVCs Channel means no selection will be chosen. VPI - Type in the value provided by ISP. VCI - Type in the value provided by ISP. Encapsulating Type - Drop down the list to choose the type provided by ISP. Vigor2860 Series User’s Guide...
Page 78 It means Max Transmit Unit for packet. The default setting is 1442. Enter your allocated username, password and authentication ISP Access Setup parameters according to the information provided by your ISP. Username – Type in the username provided by ISP in this Vigor2860 Series User’s Guide...
Page 79 Specify a MAC Address – Type the MAC address for the router manually. Index (1-15) in Schedule Setup - You can type in four sets of time schedule for your request. All the schedules can be set previously in Applications >> Schedule web page and Vigor2860 Series User’s Guide...
Page 80 Set up the DSL parameters required by your ISP. These ADSL only) settings configured here are specified for ADSL only. Multi-PVC channel - The selections displayed here are determined by the page of Internet Access >>Multi PVCs. Vigor2860 Series User’s Guide...
Page 81 WAN IP Alias. You can set up to 8 public IP addresses other than the current one you are using. Notice that this setting is available for WAN1 only. Type the additional WAN IP address and check the Enable box. Then click OK to exit the dialog. Vigor2860 Series User’s Guide...
Page 82 Type in the primary IP address for the router. If necessary, DNS Server IP Address type in secondary IP address for necessity in the future. After finishing all the settings here, please click OK to activate them. Vigor2860 Series User’s Guide...
Page 83 WAN Connection Such function allows you to verify whether network Detection connection is alive or not through ARP Detect or Ping Detect. Mode – Choose ARP Detect or Ping Detect for the system Vigor2860 Series User’s Guide...
Page 84 Address or specify another MAC address by typing on the boxes of MAC Address for the router. Specify a MAC Address – Type the MAC address for the router manually. After finishing all the settings here, please click OK to activate them. Vigor2860 Series User’s Guide...
Page 85 Check Enable PING to keep alive box to activate this function. PING to the IP - If you enable the PING function, please specify the IP address for the system to PING it for keeping alive. Vigor2860 Series User’s Guide...
Page 86 IP address automatically if you want to use Dynamic IP mode. Router Name: Type in the router name provided by ISP. Domain Name: Type in the domain name that you have assigned. DHCP Client Identifier for some ISP Vigor2860 Series User’s Guide...
Page 87 After finishing all the settings here, please click OK to activate them. To use PPTP/L2TP as the accessing protocol of the internet, please click the PPTP/L2TP tab. The following web page will be shown. Vigor2860 Series User’s Guide...
Page 88 WAN IP Alias - If you have multiple public IP addresses Method(IPCP) and would like to utilize them on the WAN interface, please use WAN IP Alias. You can set up to 8 public IP addresses other than the current one you are using. Vigor2860 Series User’s Guide...
Page 89 To use 3G/4G USB Modem (PPP mode) as the accessing protocol of the internet, please choose Internet Access from WAN menu. Then, select 3G/4G USB Modem (PPP mode) for WAN3. The following web page will be shown. Vigor2860 Series User’s Guide...
Page 90 The maximum length of the string you can set is 47 characters. APN Name APN means Access Point Name which is provided and required by some ISPs. Type the name and click Apply. The maximum length of the name you can set is 43 characters. Vigor2860 Series User’s Guide...
Page 91 IP address in this field for pinging. TTL (Time to Live) – Displays value for your reference. TTL value is set by telnet command. After finishing all the settings here, please click OK to activate them. Vigor2860 Series User’s Guide...
Page 92 It means Max Transmit Unit for packet. The default setting is 1380. After finishing all the settings here, please click OK to activate them. – – When Offline is selected, the IPv6 connection will be disabled. Vigor2860 Series User’s Guide...
Page 93 PCs under LAN also can have the public IPv6 address for Internet access by means of the generated prefix. No need to type any other information for PPP mode. Below shows an example for successful IPv6 connection based on PPP mode. Vigor2860 Series User’s Guide...
Page 94 Confirm Password Type the password again to make the confirmation. Tunnel Broker Type the address for the tunnel broker IP, FQDN or an optional port number. After finished the above settings, click OK to save the settings. Vigor2860 Series User’s Guide...
Page 95 The maximum length of the prefix you can set is 128 characters. After finished the above settings, click OK to save the settings. – – DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server. Vigor2860 Series User’s Guide...
Page 96 Available settings are explained as follows: Item Description Identify Association Choose Prefix Delegation or Non-temporary Address as the identify association. Type a number as IAID. IAID After finished the above settings, click OK to save the settings. Vigor2860 Series User’s Guide...
Page 97 Delete – Click it to remove an existed entry. Current IPv6 Address Display current interface IPv6 address. Table Static IPv6 Gateway IPv6 Gateway Address - Type your IPv6 gateway address Configuration here. After finished the above settings, click OK to save the settings. Vigor2860 Series User’s Guide...
Page 98: Multi-Pvcs
Internet Access. Type in the value provided by your ISP. Type in the value provided by your ISP. QoS Type Select a proper QoS type for the channel. Vigor2860 Series User’s Guide...
Page 99 WAN links for Channel 5, 6 and 7 are provided for router-borne application such as TR-069. The settings must be applied and obtained from your ISP. For your special request, please contact with your ISP and then click WAN link of Channel 5, 6 or 7 to configure your router. Vigor2860 Series User’s Guide...
Page 100 The maximum length of the password you can set is 48 characters. PPP Authentication – Select PAP only or PAP or CHAP for PPP. Always On – Check it to keep the network connection always. Idle Timeout – Set the timeout for breaking down the Vigor2860 Series User’s Guide...
Page 101 After finished the above settings, click OK to save the settings and return to previous page. Such configuration is applied to upstream packets. Such information will be provided by ISP. Please contact with your ISP for detailed information. Available settings are explained as follows: Item Description Vigor2860 Series User’s Guide...
Page 102 1 to 2 are reserved for NAT using. P1 to P6 It means the LAN port 1 to 6. Check the box to designate the LAN port for channel 3 to 8. Vigor2860 Series User’s Guide...
Page 103 For example, Channel 3 is set with PVC Redirect=1. It means that such channel will use the physical connection of Channel 1 to have data transmission. In other word, two WAN interfaces share the same physical WAN connection. Vigor2860 Series User’s Guide...
Page 104: Multi-Vlan
This router allows you to create multi-VLAN for different data transferring for using. Simply go to WAN and select Multi-VLAN. The system allows you to set up to eight channels for multi-VLAN. Available settings are explained as follows: Vigor2860 Series User’s Guide...
Page 105 (Web configuration/telnet/TR069). If you choose Management, the configuration for this VLAN will be effective for Web configuration/telnet/TR069. VoIP - It can be specified for VoIP only. If you choose VoIP, the configuration for this VLAN will be effective for Vigor2860 Series User’s Guide...
Page 106 Click Clear to remove all the configurations in this page if you do not satisfy it. When you finish the configuration, please click OK to save and exit this page. Or click Cancel to abort the configuration and exit this page. Vigor2860 Series User’s Guide...
Page 107: Load-Balance Policy
Displays the IP address for the start of the destination port. Dest Port End Displays the IP address for the end of the destination port. Move UP/Move Down Use Up or Down link to move the order of the policy. Vigor2860 Series User’s Guide...
Page 108 Type the destination IP end for the specified WAN interface. If this field is blank, it means that all the destination IPs will be passed through the WAN interface. Dest Port Start Type the destination port start for the destination IP. Vigor2860 Series User’s Guide...
Page 109: Lan
IP address to private IP address to forward the right packets to the right host and vice versa. Besides, Vigor router has a built-in DHCP server that assigns private IP address to each local host. See the following diagram for a briefly understanding. Vigor2860 Series User’s Guide...
Page 110 When you have several subnets in your LAN, sometimes a more effective and quicker way for connection is the Static routes function rather than other method. You may simply set rules to Vigor2860 Series User’s Guide...
Page 111 You can group local hosts by physical ports and create up to 4 virtual LANs. To manage the communication between different groups, please set up rules in Virtual LAN (VLAN) function and the rate of each. Vigor2860 Series User’s Guide...
Page 112: General Setup
Such information is set in default and you can not modify it. Details Page - Click it to access into the setting page. Each LAN will have different LAN configuration page. Each LAN must be configured in different subnet. Vigor2860 Series User’s Guide...
Page 113 Data – Type the content of the data to be processed by the function of DHCP option. Inter-LAN Routing Check the box to link two or more different subnets (LAN and LAN). When you finish the configuration, please click OK to save and exit this page. Vigor2860 Series User’s Guide...
Page 114 LAN. Disable Server – Let you manually assign IP address to every host in the LAN. Enable Relay Agent –Specify which subnet that DHCP server is located the relay agent should redirect the DHCP Vigor2860 Series User’s Guide...
Page 115 DNS server by establishing a WAN (e.g. DSL/Cable) connection. Force router to use address for DNS- Force Vigor router to use DNS servers in this page instead of DNS servers given by the Internet Access server (PPPoE, PPTP, L2TP or DHCP server). Vigor2860 Series User’s Guide...
Page 116 Disable – Click it to disable RADVD server. Advertisement Lifetime - The lifetime associated with the default router in units of seconds. It's used to control the lifetime of the prefix. The maximum value corresponds to Vigor2860 Series User’s Guide...
Page 117 Add – Click it to add a new entry. Delete – Click it to remove an existed entry. Current IPv6 Address Display current used IPv6 addresses. Table When you finish the configuration, please click OK to save and exit this page. Vigor2860 Series User’s Guide...
Page 118 Start IP Address - Enter a value of the IP address pool for the DHCP server to start with when issuing IP addresses. If the 1st IP address of your router is 192.168.1.1, the starting IP address must be 192.168.1.2 or greater, but smaller than 192.168.1.254. Vigor2860 Series User’s Guide...
Page 119 (Default: 255.255.255.0/ 24) RIP Protocol Control, Disable - deactivate the RIP protocol. It will lead to a stoppage of the exchange of routing information between routers. (Default) Enable – activate the RIP protocol. Vigor2860 Series User’s Guide...
Page 120 Edit – Click it to edit the selected MAC address. Cancel – Click it to cancel the job of adding, deleting and editing. When you finish the configuration, please click OK to save and exit this page. Vigor2860 Series User’s Guide...
Page 121: Static Route
Displays the destination address of the static route. Displays the status of the static route. Status Set to Factory Default Clear all of the settings and return to factory default settings. Viewing Routing Table Displays the routing table for your reference. Vigor2860 Series User’s Guide...
Page 122 1st subnet (192.168.1.0/24). The second is that those hosts on the internal private subnets (ex. 192.168.10.0/24) can access the Internet via the router, and continuously exchange of IP routing information with different subnets. Vigor2860 Series User’s Guide...
Page 123 Use the drop down list to specify an interface for such static route. Return to Static Route Setup page. Click on another Index Number to add another static route as show below, which regulates all packets destined to 211.100.88.0 will be forwarded to 192.168.1.3. Click OK. Vigor2860 Series User’s Guide...
Page 124 Set to Factory Default Clear all of the settings and return to factory default settings. Viewing IPv6 Routing Displays the routing table for your reference. Table Click any underline of index number to get the following page. Vigor2860 Series User’s Guide...
Page 125 Type the gateway address for this entry. Network Interface Use the drop down list to specify an interface for this static route. When you finish the configuration, please click OK to save and exit this page. Vigor2860 Series User’s Guide...
Page 126: Vlan
0 to 4095. Priority – Type the packet priority number for such VLAN. The range is from 0 to 7. P1 – P6 – Check the LAN port(s) to be grouped under the selected VLAN. Vigor2860 Series User’s Guide...
Page 127 P3 and P4. VLAN0 and VLAN1 are configured with different subnets. After checking the box to enable VLAN function, you will check the table according to the needs as shown below. Click OK to save the settings. Vigor2860 Series User’s Guide...
Page 128: Bind Ip To Mac
When this function is enabled, all the assigned IP and MAC address binding together cannot be changed. If you modified the binding IP or MAC address, it might cause you not access into the Internet. Click LAN and click Bind IP to MAC to open the setup page. Vigor2860 Series User’s Guide...
Page 129 Note: Before you select Strict Bind, you have to bind one set of IP/MAC address for one PC. If not, no one of the PCs can access into Internet. And the web user interface of the router might not be accessed. When you finish the configuration, click OK to save the settings. Vigor2860 Series User’s Guide...
Page 130: Lan Port Mirror
Mirror Port Select a port to view traffic sent from mirrored ports. Mirrored port Select which ports are necessary to be mirrored. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 131: Web Portal Setup
Display the content (Disable, URL Redirect or Message) of the profile. Interface Display the applied interfaced of the profile. Open a preview window according to the configured settings. Preview To configure the profile, click any index number link to open the following page. Vigor2860 Series User’s Guide...
Page 132 Check the box(es) representing different interfaces to be applied by such profile. The advantage is that each SSID (1/2/3/4) for wireless network can be applied with different web portal separately. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 133: Nat
192.168.1.0/24 subnet for the router. As stated before, the NAT facility can map one or more IP addresses and/or service ports into different specified services. In other words, the NAT function can be achieved by using port mapping methods. Below shows the menu items for NAT. Vigor2860 Series User’s Guide...
Page 134: Port Redirection
To use this function, please go to NAT page and choose Port Redirection web page. The Port Redirection Table provides 20 port-mapping entries for the internal hosts. Press any number under Index to access into next page for configuring port redirection. Vigor2860 Series User’s Guide...
Page 135 (as the end point). Private Port Specify the private port number of the service offered by the internal host. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 136: Dmz Host
LAN. Regular web surfing and other such Internet activities from other clients will continue to work without inappropriate interruption. DMZ Host allows a defined internal user to be totally exposed to the Internet, which usually helps some special applications such as Netmeeting or Internet Games etc. Vigor2860 Series User’s Guide...
Page 137 Click this button and then a window will automatically pop up, as depicted below. The window consists of a list of private IP addresses of all hosts in your LAN network. Select one private IP address in the list to be the DMZ host. Vigor2860 Series User’s Guide...
Page 138 IP address will be shown on the following screen. Click OK to save the setting. DMZ Host for WAN2 and WAN3 is slightly different with WAN1. Active True IP selection is available for WAN1 only. See the following figure. Vigor2860 Series User’s Guide...
Page 139 When you have selected one private IP from the above dialog, the IP address will be shown on the following screen. Click OK to save the setting. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 140: Open Ports
Inactive or Active state. To add or edit port settings, click one index number on the page. The index entry setup page will pop up. In each index entry, you can specify 10 port ranges for diverse services. Vigor2860 Series User’s Guide...
Page 141 Specify the transport layer protocol. It could be TCP, UDP, or ----- (none) for selection. Start Port Specify the starting port number of the service offered by the local host. End Port Specify the ending port number of the service offered by the local host. Vigor2860 Series User’s Guide...
Page 142: Address Mapping
In the above example, you can configure NAT Host1 to always map to 202.211.100.10 (WAN1); Host2 to always map to 202.211.100.11 (WAN1 alias); Host3 always map to 203.98.200.10 (WAN2) and Group 1 to always map to 202.211.100.10 (WAN1). Vigor2860 Series User’s Guide...
Page 143 Click the index number link to open the configuration page. Available settings are explained as follows: Item Description Enable Check to enable this entry. Protocol Specify the transport layer protocol. It could be TCP, UDP, or ALL for selection. Vigor2860 Series User’s Guide...
Page 144: Port Triggering
The duration that these ports are opened depends on the type of protocol used. The "default" durations are shown below and these duration values can be modified via telnet commands. TCP: 86400 sec. UDP: 180 sec. IGMP: 10 sec. TCP WWW: 60 sec. TCP SYN: 60 sec. Vigor2860 Series User’s Guide...
Page 145 Display the protocol for the incoming data of such triggering profile. Incoming Port Display the port for the incoming data of such triggering profile. Status Display if the rule is active or de-active. Click the index number link to open the configuration page. Vigor2860 Series User’s Guide...
Page 146 (TCP, UDP or TCP/UDP) for the incoming data of such triggering profile. Incoming Port Type the port or port range for the incoming packets. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 147: Firewall
It will check packets according to the filter rules. If legal, the packet will pass the router. The following illustrations are flow charts explaining how router will treat incoming traffic and outgoing traffic respectively. Vigor2860 Series User’s Guide...
Page 148 4. Port Scan attack 12. Tear drop attack 5. IP options 13. Ping of Death attack 6. Land attack 14. ICMP fragment 7. Smurf attack 15. Unknown protocol 8. Trace route Below shows the menu items for Firewall. Vigor2860 Series User’s Guide...
Page 149: General Setup
“Accept large incoming fragmented UDP or ICMP Packets”. By checking this box, you can play these kinds of on-line games. If security concern is in higher priority, you cannot enable “Accept large incoming fragmented UDP or ICMP Packets”. Vigor2860 Series User’s Guide...
Page 150 (pass or block) for these packets, then the router’s firewall will block the packets directly. Such page allows you to choose filtering profiles including QoS, Load-Balance policy, WCF, APP Enforcement, URL Content Filter, for data transmission via Vigor router. Vigor2860 Series User’s Guide...
Page 151 Note: When there is no user profile or group profile existed, Create New User or Create New Group item will appear for you to click to create a new one. Vigor2860 Series User’s Guide...
Page 152 For troubleshooting needs, you can specify to record information for Web Content Filter by checking the Log box. It will be sent to Syslog server. Please refer to section Syslog/Mail Alert for more detailed information. Vigor2860 Series User’s Guide...
Page 153 However, if the network is not stable, small value will be proper. Session timeout – Setting timeout for sessions can make the best utilization of network resources. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 154: Filter Setup
Set the link to the next filter set to be executed after the current filter run. Do not make a loop with many filter sets. To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page. Vigor2860 Series User’s Guide...
Page 155 ON schedule profiles are applied. Direction Set the direction of packet flow. It is for Data Filter only. For the Call Filter, this setting is not available since Call Filter is only applied to outgoing traffic. Vigor2860 Series User’s Guide...
Page 156 From the IP Group drop down list, choose the one that you want to apply. Or use the IP Object drop down list to choose the object that you want. Service Type Click Edit to access into the following dialog to choose a suitable service type. Vigor2860 Series User’s Guide...
Page 157 Filter Specifies the action to be taken when packets match the rule. Block Immediately - Packets matching the rule will be dropped immediately. Pass Immediately - Packets matching the rule will be Vigor2860 Series User’s Guide...
Page 158 [Create New] from the drop down list in this page to create a new profile. All the hosts in LAN must follow the standard configured in the APP Enforcement profile selected here. For detailed information, refer to the Vigor2860 Series User’s Guide...
Page 159 Codepage - This function is used to compare the characters among different languages. Choose correct codepage can help the system obtaining correct ASCII after decoding data from URL and enhance the correctness of URL Content Vigor2860 Series User’s Guide...
Page 160 TCP protocol only; session timeout is configured for the data flow which matched with the firewall rule. DrayTek Banner – Please uncheck this box and the following screen will not be shown for the unreachable web page. The default setting is Enabled.
Page 161 Each filter set is composed by 7 filter rules, which can be further defined. After that, in General Setup you may specify one set for call filter and one set for data filter to execute first. Vigor2860 Series User’s Guide...
Page 162: Dos Defense
10 seconds. Enable UDP flood defense Check the box to activate the UDP flood defense function. Once detecting the Threshold of the UDP packets from the Internet has exceeded the defined value, the Vigor router Vigor2860 Series User’s Guide...
Page 163 Check the box to activate the Block SYN fragment function. The Vigor router will drop any packets having SYN flag and more fragment bit set. Block Fraggle Attack Check the box to activate the Block fraggle Attack function. Vigor2860 Series User’s Guide...
Page 164 All the warning messages related to DoS Defense will be sent to user and user can review it through Syslog daemon. Look for the keyword DoS in the message, followed by a name to indicate what kind of attacks is detected. Vigor2860 Series User’s Guide...
Page 165 Vigor2860 Series User’s Guide...
Page 166: User Management
Note: If Transparency Mode is selected in Firewall>>General Setup, User Management cannot be used any more. Please uncheck Transparency Mode first if you want to utilize user management to handle users in LAN, WAN or WLAN. Vigor2860 Series User’s Guide...
Page 167: General Setup
Landing Page Type the information to be displayed on the first web page when the LAN user accessing into Internet via such router. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 168: User Profile
To set the user profile, please click any index number link to open the following page. Notice that profile 1 (admin) and profile 2 (Dial-In User) are factory default settings. Profile 2 is reserved for future use. Vigor2860 Series User’s Guide...
Page 169 Firewall can be adopted for such user profile. Create New Policy – If you choose such item, the following page will be popped up for you to define another filter rule as a new policy. Vigor2860 Series User’s Guide...
Page 170 URL (if requested by the user) will be guided automatically by the router. Alert Tool – If it is selected, the user can open Alert Tool and type the user name and password for authentication. A Vigor2860 Series User’s Guide...
Page 171: User Group
Next, the user can access Internet through any browser on Windows. Note that Alert Tool can be downloaded from DrayTek web site. Telnet – If it is selected, the user can use Telnet command to perform the authentication job.
Page 172 User defined profiles will be numbered with 3, 4, 5 and so Selected Keyword Objects Click button to add the selected user objects in this box. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 173: User Online Status
Idle Time Display the idle timeout setting for such profile. Action Block - can prevent specified user accessing into Internet. Unblock – the user will be blocked. Logout – the user will be logged out forcefully. Vigor2860 Series User’s Guide...
Page 174: Objects Settings
You can set up to 192 sets of IP Objects with different conditions. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Display the profile number that you can configure. Index Name Display the name of the object profile. Vigor2860 Series User’s Guide...
Page 175 Select Range Address if this object contains several IPs within a range. Select Subnet Address if this object contains one subnet for IP address. Select Any Address if this object contains any IP address. Select Mac Address if this object contains Mac address. Vigor2860 Series User’s Guide...
Page 176: Ip Group
After finishing all the settings here, please click OK to save the configuration. Below is an example of IP objects settings. This page allows you to bind several IP objects into one IP group. Available settings are explained as follows: Vigor2860 Series User’s Guide...
Page 177 Selected IP Objects Click >> button to add the selected IP objects in this box. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 178: Ipv6 Object
Display the name of the object profile. To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Vigor2860 Series User’s Guide...
Page 179 Invert Selection If it is checked, all the IPv6 addresses except the ones listed above will be applied later while it is chosen. After finishing all the settings, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 180: Ipv6 Group
To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Available settings are explained as follows: Vigor2860 Series User’s Guide...
Page 181: Service Type Object
You can set up to 96 sets of Service Type Objects with different conditions. Available settings are explained as follows: Item Description Clear all profiles. Set to Factory Default Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor2860 Series User’s Guide...
Page 182 (>) – the port number greater than this value is available. (<) – the port number less than this value is available for this profile. Vigor2860 Series User’s Guide...
Page 183: Service Type Group
This page allows you to bind several service types into one group. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the group profile. Vigor2860 Series User’s Guide...
Page 184 Objects Setting>>Service Type Object will be shown in this box. Selected Service Type Click >> button to add the selected IP objects in this box. Objects After finishing all the settings, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 185: Keyword Object
Web Content Filter Profile. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor2860 Series User’s Guide...
Page 186 Contents. When you browse the webpage, the page with gambling information will be watched out and be passed/blocked based on the configuration on Firewall settings. After finishing all the settings, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 187: Keyword Group
To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Available settings are explained as follows: Vigor2860 Series User’s Guide...
Page 188: File Extension Object
Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor2860 Series User’s Guide...
Page 189 Type a name for this profile. The maximum length of the name you can set is 7 characters. Type a name for such profile and check all the items of file extension that will be processed in the router. Finally, click OK to save this profile. Vigor2860 Series User’s Guide...
Page 190 Display the service provider which offers SMS service. To set a new profile, please do the steps listed below: 1. Click the SMS Provider tab, and click the number (e.g., #1) under Index column for configuration in details. Vigor2860 Series User’s Guide...
Page 191 Note that one credit equals to one SMS text message on the standard route. Sending Interval To avoid quota being exhausted soon, type time interval for sending the SMS. 3. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 192 Display the name of this profile. It cannot be modified. Service Provider Type the website of the service provider. Type the URL string in the box under the filed of Service Provider. You have to contact your SMS provider to obtain the exact URL string. Vigor2860 Series User’s Guide...
Page 193: Sms/Mail Service Object
Each item is explained as follows: Item Description Set to Factory Default Clear all of the settings and return to factory default settings. Index Display the profile number that you can configure. Profile Display the name for such mail server profile. Vigor2860 Series User’s Guide...
Page 194 31 characters. Password – Type a password for authentication. The maximum length of the password you can set is 31 characters. Sending Interval Define the interval for the system to send the SMS out. Vigor2860 Series User’s Guide...
Page 195: Notification Object
You can set an object with different monitoring situation. To set a new profile, please do the steps listed below: 1. Open Object Setting>>Notification Object, and click the number (e.g., #1) under Index column for configuration in details. Vigor2860 Series User’s Guide...
Page 196 Display the types that will be monitored. Status Display the status for the category. You can check the box you want to be monitored. 3. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 197: Csm Profile
Please note that this action will not introduce any delay in your Web surfing because each of multiple load balanced database servers can handle millions of requests for categorization. Note: The priority of URL Content Filter is higher than Web Content Filter. Vigor2860 Series User’s Guide...
Page 198: App Enforcement Profile
Click the number under Index column for settings in detail. There are four tabs IM, P2P, Protocol and Misc displayed on this page. Each tab will bring out different items that you can choose to disallow people using. Vigor2860 Series User’s Guide...
Page 199 Uncheck all the selected boxes. The profiles configured here can be applied in the Firewall>>General Setup and Firewall>>Filter Setup pages as the standard for the host(s) to follow. Below shows the items which are categorized under IM. Vigor2860 Series User’s Guide...
Page 200: Url Content Filter Profile
Content Filter work better than traditional firewall in the field of filtering? Because it checks the URL strings or some of HTTP data hiding in the payload of TCP packets while legacy firewall inspects packets based on the fields of TCP/IP headers only. Vigor2860 Series User’s Guide...
Page 201 Display the name of the URL Content Filter Profile. Name Administration Message You can type the message manually for your necessity. You can set eight profiles as URL content filter. Simply click the index number under Profile to open the following web page. Vigor2860 Series User’s Guide...
Page 202 Control and Web Feature below, such function can determine the priority for the actions executed. For this one, the router will process the packages with the conditions set below for web feature first, then URL second. Vigor2860 Series User’s Guide...
Page 203 In addition, the maximal length of each frame is 32-character long. After specifying keywords, the Vigor router will decline the connection request to the website whose URL string matched to any user-defined keyword. It Vigor2860 Series User’s Guide...
Page 204 Upload – Check the box to block the file upload by way of web page. File Extension Profile – Choose one of the profiles that you configured in Object Setting>> File Extension Objects previously for passing or blocking the file downloading. Vigor2860 Series User’s Guide...
Page 205: Web Content Filter Profile
Note: If you have used Service Activation Wizard to activate WCF service, you can skip this section. WCF adopts the mechanism developed and offered by certain service provider (e.g., DrayTek). No matter activating WCF feature or getting a new license for web content filter, you have to click Activate to satisfy your request.
Page 206 Setup Test Server It is recommended for you to use the default setting, auto-selected. Find more Click it to open http://myvigor.draytek.com for searching another qualified and suitable server. Click this link to do the verification. Test a site to verify...
Page 207 If you have and activate another web content filter license, the items will be changed simultaneously. All of the configuration made for web content filter will be deleted automatically. Therefore, please backup your data before you change the web content filter license. Vigor2860 Series User’s Guide...
Page 208 Block – Only the log about Block will be recorded in Syslog. All – All the actions (Pass and Block) will be recorded in Syslog. After finishing all the settings, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 209: Bandwidth Management
To activate the function of limit session, simply click Enable and set the default session limit. Available settings are explained as follows: Item Description Session Limit Enable - Click this button to activate the function of limit session. Disable - Click this button to close the function of limit session. Vigor2860 Series User’s Guide...
Page 210 All the schedules can be set previously in Application >> Schedule web page and you can use the number that you have set in that web page. After finishing all the settings, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 211: Bandwidth Limit
Disable - Click this button to close the function of limit bandwidth. Default TX limit - Define the default speed of the upstream for each computer in LAN. Default RX limit - Define the default speed of the Vigor2860 Series User’s Guide...
Page 212 Index (1-15) in Schedule Setup - You can type in four sets of time schedule for your request. All the schedules can be set previously in Application >> Schedule web page and you can use the number that you have set in that web page. Vigor2860 Series User’s Guide...
Page 213: Quality Of Service
The core routers in the backbone will do the same checking before executing treatments in order to ensure service-level consistency throughout the whole QoS-enabled network. Vigor2860 Series User’s Guide...
Page 214 Service Type – Allow to configure detailed settings for the service type. Enable the First Priority When this feature is enabled, the VoIP SIP/UDP packets will for VoIP SIP/RTP be sent with highest priority. SIP UDP Port – Set a port number used for SIP. Vigor2860 Series User’s Guide...
Page 215 There are four queues allowed for QoS control. The first three (Class 1 to Class 3) class rules can be adjusted for your necessity. Yet, the last one is reserved for the packets which are not suitable for the user-defined class rules. Vigor2860 Series User’s Guide...
Page 216 Note: The rate of outbound/inbound must be smaller than the real bandwidth to ensure correct calculation of QoS. It is suggested to set the bandwidth value for inbound/outbound as 80% - 85% of physical network speed provided by ISP to maximize the QoS performance. Vigor2860 Series User’s Guide...
Page 217 After you click the Edit link, you will see the following page. Now you can define the name for that Class. In this case, “Test” is used as the name of Class Index #1. For adding a new rule, click Add to open the following page. Vigor2860 Series User’s Guide...
Page 218 Service Type drop down list. Those types are predefined in factory. Simply choose the one that you want for using by current QoS. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 219 Edit to open the rule edit page for modification. To add a new service type, edit or delete an existed service type, please click the Edit link under Service Type field. After you click the Edit link, you will see the following page. Vigor2860 Series User’s Guide...
Page 220: Applications
Dynamic DNS server. Once the router is online, you will be able to use the registered domain name to access the router or internal virtual servers from the Internet. It is particularly helpful if you host a web server, FTP server, or other server behind the router. Vigor2860 Series User’s Guide...
Page 221 Account, and choose correct Service Provider: dyndns.org, type the registered hostname: hostname and domain name suffix: dyndns.org in the Domain Name block. The following two blocks should be typed your account Login Name: test and Password: test. Vigor2860 Series User’s Guide...
Page 222 Type in the password that you set for applying domain. Wildcard and The Wildcard and Backup MX (Mail Exchange) features Backup MX are not supported for all Dynamic DNS providers. You could get more detailed information from their websites. Vigor2860 Series User’s Guide...
Page 223: Schedule
Set to Factory Default Clear all profiles and recover to factory settings. Index Click the number below Index to access into the setting page of schedule. Status Display if this schedule setting is active or inactive. Vigor2860 Series User’s Guide...
Page 224 Specify the duration (or period) for the schedule. How often -Specify how often the schedule will be applied Once -The schedule will be applied just once Weekdays -Specify which days in one week should perform the schedule. Vigor2860 Series User’s Guide...
Page 225: Radius
RADIUS server in performing mutual authentication. It enables centralized remote access authentication for network management. Available settings are explained as follows: Item Description Enable Check to enable RADIUS client feature. Server IP Address Enter the IP address of RADIUS server Vigor2860 Series User’s Guide...
Page 226: Ldap /Active Directory Setup
LDAP to search or list the directory object, inquire or manage the active directory. This page allows you to enable the function and specify general settings for LDAP server. Vigor2860 Series User’s Guide...
Page 227 Type this setting if Regular Mode is selected as Bind Type. Specify a password if Regular Mode is selected as Bind Regular Password Type. After finished the above settings, click OK button to save the settings. Vigor2860 Series User’s Guide...
Page 228 Type a name for such profile. The length of the use name is limited to 19 characters. Common Name Type or edit the common name identifier for the LDAP server. Identifier The common name identifier for most LDAP server is “cn”. Vigor2860 Series User’s Guide...
Page 229 After finished the above settings, click OK to save and exit this page. A new profile has been created. For detailed information about LDAP application, refer to section 4.7 How to Implement the AD/LDAP Authentication for User Management? Vigor2860 Series User’s Guide...
Page 230: Upnp
NAT router. The application will also learn the external IP address and configure port mappings on the router. Subsequently, such a facility forwards packets from the external ports of the router to the internal ports used by the application. Vigor2860 Series User’s Guide...
Page 231 Non-privileged users can control some router functions, including removing and adding port mappings. The UPnP function dynamically adds port mappings on behalf of some UPnP-aware applications. When the applications terminate abnormally, these mappings may not be removed. Vigor2860 Series User’s Guide...
Page 232: Igmp
This field displays the ID port for the multicast group. The available range for IGMP starts from 224.0.0.0 to 239.255.255.254. It indicates the LAN port used for the multicast group. P1 to P6 After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 233: Wake On Lan
MAC Address Type any one of the MAC address of the bound PCs. Wake Up Click this button to wake up the selected IP. See the following figure. The result will be shown on the box. Vigor2860 Series User’s Guide...
Page 234: Sms / Mail Alert Service
Available settings are explained as follows: Item Description Index Check the box to enable such profile. SMS Provider Use the drop down list to choose SMS service provider. You can click SMS Provider link to define the SMS server. Vigor2860 Series User’s Guide...
Page 235 Use the drop down list to choose a message profile. The recipient will get the content stated in the message profile. You can click the Notify Profile link to define the content of the mail message. Vigor2860 Series User’s Guide...
Page 236: Vpn And Remote Access
Such wizard is used to configure VPN settings for VPN client. Such wizard will guide to set the LAN-to-LAN profile for VPN dial out connection (from server to client) step by step. 1. Open VPN and Remote Access>>VPN Client Wizard. The following page will appear. Vigor2860 Series User’s Guide...
Page 237 Route Mode. Please choose a There are 32 VPN profiles for users to set. LAN-to-LAN Profile 2. When you finish the mode and profile selection, please click Next to open the following page. Vigor2860 Series User’s Guide...
Page 238 Note: The following descriptions for VPN Type are based on the Route Mode specified in LAN-to-LAN Client Mode Selection. When you choose PPTP (None Encryption) or PPTP (Encryption), you will see the following graphic: Vigor2860 Series User’s Guide...
Page 239 When you choose IPSec, you will see the following graphic: When you choose L2TP, you will see the following graphic: Vigor2860 Series User’s Guide...
Page 240 WAN1/WAN2/WAN3 as the first channel for VPN connection. If WAN1/WAN2/WAN3 fails, the router will use another WAN interface instead. WAN1 Only /WAN2 Only/WAN 3 Only- While connecting, the router will use WAN1/WAN2/WAN3 as Vigor2860 Series User’s Guide...
Page 241 Please type one LAN IP address (according to the real location of the remote host) for building VPN connection. Remote Network Please type the network mask (according to the real location Mask of the remote host) for building VPN connection. Vigor2860 Series User’s Guide...
Page 242 Click this radio button to set another profile of VPN Server Do another VPN Server Wizard Setup through VPN Server Wizard. View more detailed Click this radio button to access VPN and Remote configuration Access>>LAN to LAN for viewing detailed configuration. Vigor2860 Series User’s Guide...
Page 243: Vpn Server Wizard
VPN connection. This item is available when you choose Site to Site VPN Please choose a LAN-to-LAN Profile (LAN-to-LAN) as VPN server mode. There are 32 VPN profiles for users to set. Vigor2860 Series User’s Guide...
Page 244 2. After making the choices for the server profile, please click Next. You will see different configurations based on the selection you made. Here we take the examples of choosing Remote-Dial-in User as the VPN Server Mode. Vigor2860 Series User’s Guide...
Page 245 When you check PPTP, you will see the following graphic: When you check PPTP & IPSec & L2TP (three types) or PPTP&IPSec (two types) or L2TP with Policy (Nice to Have/Must), you will see the following graphic: Vigor2860 Series User’s Guide...
Page 246 Peer IP/VPN Client Type the WAN IP address or VPN client IP address for the remote client. Peer ID Type the ID name for the remote client. The length of the name is limited to 47 characters. Vigor2860 Series User’s Guide...
Page 247 Click this radio button to set another profile of VPN Server Server Wizard Setup through VPN Server Wizard. View more detailed Click this radio button to access VPN and Remote configuration Access>>LAN to LAN for viewing detailed configuration. Vigor2860 Series User’s Guide...
Page 248: Remote Access Control
This submenu only applies to PPP-related VPN connections, such as PPTP, L2TP, L2TP over IPSec. Available settings are explained as follows: Item Description Dial-In PPP PAP Only - elect this option to force the router to Authentication authenticate dial-in users with the PAP protocol. Vigor2860 Series User’s Guide...
Page 249 However, if there is no profile listed, simply click the link of PPTP LDAP Profile to create/add some new LDAP profiles you want. For detailed information about LDAP application, refer to section 4.7 How to Implement the AD/LDAP Authentication for User Management? Vigor2860 Series User’s Guide...
Page 250: Ipsec General Setup
Available settings are explained as follows: Item Description This usually applies to those are remote dial-in user or node IKE Authentication Method (LAN-to-LAN) which uses dynamic IP address and IPSec-related VPN connections such as L2TP over IPSec Vigor2860 Series User’s Guide...
Page 251 High (ESP) - Encapsulating Security Payload (ESP) means payload (data) will be encrypted and authenticated. You may select encryption algorithm from Data Encryption Standard (DES), Triple DES (3DES), and AES. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 252: Ipsec Peer Identity
Click each index to edit one peer digital certificate. There are three security levels of digital signature authentication: Fill each necessary field to authenticate the remote peer. The following explanation will guide you to fill all the necessary fields. Vigor2860 Series User’s Guide...
Page 253 The field includes Country (C), State (ST), Location (L), Organization (O), Organization Unit (OU), Common Name (CN), and Email (E). After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 254: Openvpn General Setup
CA certificate and local certificate for OpenVPN tunnel. Certificate authentication can offer more secure VPN tunnel between the client and the router. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 255: Remote Dial-In User
Click each index to edit one remote user profile. Each Dial-In Type requires you to fill the different corresponding fields on the right. If the fields gray out, it means you may leave it untouched. The following explanation will guide you to fill all the necessary fields. Vigor2860 Series User’s Guide...
Page 256 None - Do not apply the IPSec policy. Accordingly, the VPN connection employed the L2TP without IPSec policy can be viewed as one pure L2TP connection. Nice to Have - Apply the IPSec policy first, if it is applicable during negotiation. Otherwise, the dial-in Vigor2860 Series User’s Guide...
Page 257 The only exception is Digital Signature (X.509) can be set when you select IPSec tunnel either with or without specify the IP address of the remote node. Pre-Shared Key - Check the box of Pre-Shared Key to Vigor2860 Series User’s Guide...
Page 258: Lan To Lan
L2TP by itself or over IPSec) and corresponding security methods, etc. The router supports up to 32 VPN tunnels simultaneously. The following figure shows the summary table. The following figure shows the summary table according to the item (All/Trunk) selected for View. Vigor2860 Series User’s Guide...
Page 259 If there is no profile joined yet, this page will be shown as follows: Available settings are explained as follows: Item Description View All – Click it to display the LAN to LAN profiles. Trunk – Click it to display the Trunk profiles. Vigor2860 Series User’s Guide...
Page 260 LAN-to-LAN profile includes 4 subgroups. If the fields gray out, it means you may leave it untouched. The following explanations will guide you to fill all the necessary fields. For the web page is too long, we divide the page into several sections for explanation. Vigor2860 Series User’s Guide...
Page 261 Block – This is default setting. Click this button to let multicast packets be blocked by the router. Call Direction - Specify the allowed call direction of this LAN-to-LAN profile. Both:-initiator/responder Dial-Out- initiator only Vigor2860 Series User’s Guide...
Page 262 Password - This field is applicable when you select PPTP or L2TP with or without IPSec policy above. The length of the password is limited to 15 characters. PPP Authentication - This field is applicable when you Vigor2860 Series User’s Guide...
Page 263 AES without Authentication-Use AES encryption algorithm and not apply any authentication scheme. AES with Authentication-Use AES encryption algorithm and apply MD5 or SHA-1 authentication algorithm. Advanced - Specify mode, proposal and key life of each IKE phase, Gateway, etc. Vigor2860 Series User’s Guide...
Page 264 Index(1-15) - Set the wireless LAN to work at certain time interval only. You may choose up to 4 schedules out of the 15 schedules pre-defined in Applications >> Schedule setup. The default setting of this field is blank and the function will always work. Vigor2860 Series User’s Guide...
Page 265 None - Do not apply the IPSec policy. Accordingly, the VPN connection employed the L2TP without IPSec policy can be viewed as one pure L2TP connection. Nice to Have - Apply the IPSec policy first, if it is applicable during negotiation. Otherwise, the Vigor2860 Series User’s Guide...
Page 266 IPSec Security Method - This group of fields is a must for IPSec Tunnels and L2TP with IPSec Policy when you specify the remote node. Medium- Authentication Header (AH) means data will be authenticated, but not be encrypted. By default, this option is active. Vigor2860 Series User’s Guide...
Page 267 More - Add a static route to direct all traffic destined to more Remote Network IP Addresses/ Remote Network Mask through the VPN connection. This is usually used when you find there are several subnets behind the remote VPN router. Vigor2860 Series User’s Guide...
Page 268 IP, please choose NAT, otherwise choose Route. Change default route to this VPN tunnel - Check this box to change the default route with this VPN tunnel. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 269: Vpn Trunk Management
VPN Tunnels disconnected. Users do not need to reconnect with setting TCP/UDP Service Port again. The VPN Load Balance function can keep the transmission for internal data on tunnel stably Vigor2860 Series User’s Guide...
Page 270 Dial-in mode (for call direction) in LAN-to-LAN. Type - Display the connection type for that profile, such as IPSec, PPTP, L2TP, L2TP over IPSec (NICE), L2TP over IPSec(MUST) and so on. Vigor2860 Series User’s Guide...
Page 271 IPSec(MUST) and so on. Member2 - Display the dial-out profile selected from the Member2 drop down list below. Advanced – This button is only available when there is one or more profiles created in this page. Vigor2860 Series User’s Guide...
Page 272 The corresponding members (LAN-to-LAN profiles) grouped in such new VPN TRUNK – VPN Backup mechanism profile will be locked. The profiles in LAN-to-LAN will be displayed in red. VPN TRUNK – VPN Load Balance mechanism profile will be locked. The Vigor2860 Series User’s Guide...
Page 273 Enable radio button; type a name for such profile (e.g., 071023); choose one of the LAN-to-LAN profiles from Member1 drop down list; choose one of the LAN-to-LAN profiles from Member2 drop down list; and click Add at last. Vigor2860 Series User’s Guide...
Page 274 Peer GRE IP. See the following graphic for an example. Later, on peer side (as VPN Client): please type 192.168.50.100 in the field of My GRE IP and type IP address of the server (192.168.50.200) in the field of Peer GRE IP. Vigor2860 Series User’s Guide...
Page 275 (10Mbps/100Mbps) and switch with fixed value ratio (3:7) for packet transmission. If the transmission rate for packets on both sides of the tunnels is the same, the value of Auto Weighted should be 5.5. According to Speed Ratio allows Vigor2860 Series User’s Guide...
Page 276 Port also fits the number here, such binding tunnel table can be established. Other means when the source IP, destination IP, destination port and fragment conditions match with the settings specified here with different TCP Service Port/UDP Service Port/ICMP/IGMP, such binding tunnel table can be established. Vigor2860 Series User’s Guide...
Page 277 Type Binding Src IP range (Start and End) and Binding Des IP range (Start and End). Choose TCP/UDP, IGMP/ICMP or Other as Binding Protocol. Detailed Settings for Advanced Backup Available settings are explained as follows: Vigor2860 Series User’s Guide...
Page 278: Connection Management
LAN-to-LAN (with Index number and VPN Server IP address). The VPN connection built by General Mode does not support VPN backup function. Backup Mode - This filed displays the profile name saved in VPN TRUNK Management (with Index number and Vigor2860 Series User’s Guide...
Page 279: Certificate Management
Remember to adjust the time of Vigor router before using the certificate so that you can get the correct valid period of certificate. Below shows the menu items for Certificate Management. Available settings are explained as follows: Item Description Generate Click this button to open Generate Certificate Request window. Vigor2860 Series User’s Guide...
Page 280 (used for identifying different certificate), subject alternative name type and relational settings for subject name. Then click GENERATE again. Note: Please be noted that “Common Name” must be configured with rotuer’s WAN IP or domain name. Vigor2860 Series User’s Guide...
Page 281 Upload Local Certificate It allows users to import the certificate which is generated by vigor router and signed by CA server. If you have done well in certificate generation, the Status of the certificate will be shown as “OK”. Vigor2860 Series User’s Guide...
Page 282 Click this button to view the detailed settings for certificate request. Note: You have to copy the certificate request information from above window. Next, access your CA server and enter the page of certificate request, copy the information into Vigor2860 Series User’s Guide...
Page 283: Trusted Ca Certificate
For viewing each trusted CA certificate, click View to open the certificate detail information window. If you want to delete a CA certificate, choose the one and click Delete to remove all the certificate information. Vigor2860 Series User’s Guide...
Page 284: Certificate Backup
Backup on the following screen to save them. If you want to set encryption password for these certificates, please type characters in both fields of Encrypt password and Retype password. Also, you can use Restore to retrieve these two settings to the router whenever you want. Vigor2860 Series User’s Guide...
Page 285: Wireless Lan
SSID as identification, located channel etc. Vigor router supports four SSID settings for wireless connections. Each SSID can be defined with different name and download/upload rate for selecting by stations connected to the router wirelessly. Vigor2860 Series User’s Guide...
Page 286 MAC addresses to isolate users’ access from wired LAN. Manage Wireless Stations - Station List will display all the station in your wireless network and the status of their connection. Below shows the menu items for Wireless LAN. Vigor2860 Series User’s Guide...
Page 287: General Setup
Enable Wireless LAN Check the box to enable wireless function. Mode At present, the router can connect to 11g Only, 11n Only(2.4 GHz), Mixed (11b+11g), Mixed (11g+11n), and Mixed (11b+11g+11n) stations simultaneously. Simply choose Mixed (11b+11g+11n) mode. Vigor2860 Series User’s Guide...
Page 288 Means the channel of frequency of the wireless LAN. The Channel default channel is 6. You may switch channel if the selected channel is under serious interference. If you have no idea of choosing the frequency, please select Auto to let system determine for you. Vigor2860 Series User’s Guide...
Page 289 Upload – Check Enable and type the transmitting rate for data upload. Default value is 30,000 kbps. Download – Type the transmitting rate for data download. Default value is 30,000 kbps. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 290: Security
PSK value for connection. By clicking the Security Settings, a new web page will appear so that you could configure the settings of WPA and WEP. Available settings are explained as follows: Item Description Vigor2860 Series User’s Guide...
Page 291 Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such as 012345678..(or 64 Hexadecimal digits leading by 0x, such as "0x321253abcde..."). 64-Bit - For 64 bits WEP key, either 5 ASCII characters, such as 12345 (or 10 hexadecimal digitals leading by 0x, Vigor2860 Series User’s Guide...
Page 292: Access Control
Item Description Enable Mac Address Select to enable the MAC Address filter for wireless LAN Filter identified with SSID 1 to 4 respectively. All the clients (expressed by MAC addresses) listed in the box can be Vigor2860 Series User’s Guide...
Page 293: Wps
He/she only needs to press a button on wireless client, and WPS will connect for client and router automatically. There are two methods to do network connection through WPS between AP and Stations: pressing the Start PBC button or using PIN Code. Vigor2860 Series User’s Guide...
Page 294 For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode in Wireless LAN>>Security, you will see the following message box. Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK mode and access WPS again. Vigor2860 Series User’s Guide...
Page 295 Start PIN button. The WPS LED on the router will blink fast when WPS is in progress. It will return to normal condition after two minutes. (You need to setup WPS within two minutes) Vigor2860 Series User’s Guide...
Page 296: Wds
The application for the WDS-Repeater mode is depicted as below: The major difference between these two modes is that: while in Repeater mode, the packets received from one peer AP can be repeated to another peer AP through WDS links. Yet in Vigor2860 Series User’s Guide...
Page 297 Bridge 2 through WDS links. However, hosts connected to Bridge 1 CANNOT communicate with hosts connected to Bridge 3 through Bridge 2. Click WDS from Wireless LAN menu. The following page will be shown. Vigor2860 Series User’s Guide...
Page 298 Disable to cancel this function. It allows user to send “hello” message to peers. Yet, it is Status valid only when the peer also supports this function. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 299: Advanced Setting
Aggregation MSDU can sizes. It is used for improving MAC layer’s performance for some brand’s clients. The default setting is Enable. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 300: Wmm Configuration
1 to 15. Be aware that CWMax value must be greater than CWMin or equals to CWMin value. Both values will influence the time delay for WMM accessing categories. The difference between AC_VI and AC_VO Vigor2860 Series User’s Guide...
Page 301 “Check” the box means the AP router will not answer any response request for the transmitting packets. It will have better performance with lower reliability. After finishing all the settings here, please click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 302: Ap Discovery
AP’s MAC address on the bottom of the page and click Bridge or Repeater. Next, click Add to. Later, the MAC address of the AP will be added to Bridge or Repeater field of WDS settings page. Vigor2860 Series User’s Guide...
Page 303: Station List
WLAN station and click Add to Access Control below. Available settings are explained as follows: Item Description Refresh Click this button to refresh the status of station list. Click this button to add current typed MAC address into Access Control. Vigor2860 Series User’s Guide...
Page 304: Ssl Vpn
Otherwise, choose Self-signed to use the router’s built-in default certificate. The default certificate can be used in SSL VPN server and HTTPS Web Proxy. Vigor2860 Series User’s Guide...
Page 305: Ssl Web Proxy
Display current status (active or inactive) of such profile. Active Click number link under Index filed to set detailed configuration. Available settings are explained as follows: Item Description Name Type name of the profile. The length of the name is limited to 15 characters. Vigor2860 Series User’s Guide...
Page 306: Ssl Application
Display the application name of the profile that you create. Host Address Display the IP address for VNC/RDP or SAMBA path. Service Display the type of the service selected, e.g., VNC/RDP/SAMBA. Active Display current status (active or inactive) of the selected profile. Vigor2860 Series User’s Guide...
Page 307 Virtual Network Computing (VNC) – It allows you to access and control a remote PC through VNC protocol. Remote Desktop Protocol (RDP) – It allows you to access and control a remote PC through RDP protocol. Vigor2860 Series User’s Guide...
Page 308 If you choose RDP, you have to choose the screen size for such application. Samba Path If you choose Samba, you have to specify the path of the Samba service. 3. Enter the required information. 4. After finished the above settings, click OK to save the configuration. Vigor2860 Series User’s Guide...
Page 309: User Account
Such profiles will be used by applications such as User Management, VPN and etc. Each item is explained as follows: Item Description Set to Factory Default Click to clear all indexes. Index Display the number of the client which connecting to FTP server. Vigor2860 Series User’s Guide...
Page 310 >> button. It will be displayed in the Selected User Account on the right box. For detailed information about configuring the profile setting, refer to Objects Setting>>IP Group. Vigor2860 Series User’s Guide...
Page 311: Online User Status
If you have finished the configuration of SSL Web Proxy (server), users can find out corresponding settings when they access into Draytek SSL VPN portal interface. Next, users can open SSL VPN>> Online Status to view logging status of SSL VPN.
Page 312: Usb Application
Available settings are explained as follows: Item Description Simultaneous FTP Connections - This field is used to General Settings specify the quantity of the FTP sessions. The router allows up to 6 FTP sessions connecting to USB storage disk at one Vigor2860 Series User’s Guide...
Page 313: Usb User Management
USB storage disk must type the same username and password configured in this page. Before adding or modifying settings in this page, please insert a USB storage disk first. Otherwise, an error message will appear to warn you. Click index number to access into configuration page. Vigor2860 Series User’s Guide...
Page 314 USB storage disk. Note: When write protect status for the USB storage disk is ON, you cannot type any new folder name in this field. Vigor2860 Series User’s Guide...
Page 315: File Explorer
File Explorer offers an easy way for users to view and manage the content of USB storage disk connected on Vigor router. Available settings are explained as follows: Item Description Click this icon to refresh files list. Refresh Click this icon to return to the upper directory. Back Vigor2860 Series User’s Guide...
Page 316: Usb Disk Status
Username It displays the username that user uses to login to the FTP server. When you insert USB storage disk into the Vigor router, the system will start to find out such device within several seconds. Vigor2860 Series User’s Guide...
Page 317: Syslog Explorer
Always record the new event – only the newest events will be recorded by the system. Time Display the time of the event occurred. Message Display the information for each event. Vigor2860 Series User’s Guide...
Page 318: Temperature Sensor
Temperature Unit - Choose the display unit of the temperature. There are two types for you to choose. Alarm Settings Alarm Method – Choose one of the options as the alarm method. Vigor2860 Series User’s Guide...
Page 319 Maintenance>>Syslog / Mail Alert Setup. Upper temperature limit/Lower temperature limit - Type the upper limit and lower limit for the system to send out temperature alert. Save the settings. Below shows an example of temperature graph: Vigor2860 Series User’s Guide...
Page 320: System Maintenance
The System Status provides basic network settings of Vigor router. It includes LAN and WAN interface information. Also, you could get the current running firmware version or firmware related information from this presentation. Available settings are explained as follows: Vigor2860 Series User’s Guide...
Page 321 Scope - Display the scope of IPv6 address. For example, IPv6 Link Local could only be used for direct IPv6 link. It can't be used for IPv6 internet. Internet Access Mode – Display the connection mode chosen for accessing into Internet. Vigor2860 Series User’s Guide...
Page 322: 312
CPE. Periodic Inform Settings The default setting is Enable. Please set interval time or schedule time for the router to send notification to CPE. Or click Disable to close the mechanism of notification. Vigor2860 Series User’s Guide...
Page 323: Administrator Password
23 characters. Confirm Password Type in the new password again. When you click OK, the login window will appear. Please use the new password to access into the web user interface again. Vigor2860 Series User’s Guide...
Page 324: User Password
Below shows an example for accessing into User Operation with User Password. 1. Open System Maintenance>>User Password. 2. Check the box of Enable User Mode for simple web configuration to enable user mode operation. Type a new password in the field of New Password and click OK. Vigor2860 Series User’s Guide...
Page 325 4. Log out Vigor router web user interface by clicking the Logout button. 5. The following window will be open to ask for username and password. Type the new user password in the filed of Password and click Login. Vigor2860 Series User’s Guide...
Page 326: Login Customization
Login Background URL Type the URL for the web page which will be shown as the background. Login Description Type a brief description (e.g., Welcome to DrayTek) which will be shown on the heading of the login dialog. Vigor2860 Series User’s Guide...
Page 327: Configuration Backup
Click Backup button to get into the following dialog. Click Save button to open another dialog for saving configuration as a file. In Save As dialog, the default filename is config.cfg. You could give it another name by yourself. Vigor2860 Series User’s Guide...
Page 328 Click Browse button to choose the correct configuration file for uploading to the router. Click Restore button and wait for few seconds, the following picture will tell you that the restoration procedure is successful. Vigor2860 Series User’s Guide...
Page 329: Syslog/Mail Alert
Mail Syslog – Check the box to recode the mail event on Syslog. Enable syslog message - Check the box listed on this web page to send the corresponding message of firewall, VPN, User Access, Call, WAN, Router/DSL information to Vigor2860 Series User’s Guide...
Page 330 From the Syslog screen, select the router you want to monitor. Be reminded that in Network Information, select the network adapter used to connect to the router. Otherwise, you won’t succeed in retrieving information from the router. Vigor2860 Series User’s Guide...
Page 331 Vigor2860 Series User’s Guide...
Page 332: Time And Date
Enable Daylight Saving Check the box to enable the daylight saving. Such feature is available for certain area. Automatically Update Select a time interval for updating from the NTP server. Interval Click OK to save these settings. Vigor2860 Series User’s Guide...
Page 333: Management
A maximum of three IPs/subnet masks is allowed. List IP - Indicate an IP address allowed to login to the router. Subnet Mask - Represent a subnet mask allowed to login to the router. Vigor2860 Series User’s Guide...
Page 334 Internet. Check the box(es) to specify. Enable PING from the Internet - Check the checkbox to enable all PING packets from the Internet. For security issue, this function is disabled by default. Vigor2860 Series User’s Guide...
Page 335: Reboot System
Note: When the system pops up Reboot System web page after you configure web settings, please click Reboot Now to reboot your router for ensuring normal operation and preventing unexpected errors of the router in the future. Vigor2860 Series User’s Guide...
Page 336: Firmware Upgrade
Note that this example is running over Windows OS (Operating System). Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is www.DrayTek.com (or local DrayTek's web site) and FTP site is ftp.DrayTek.com.
Page 337: Activation
The Activate link brings you accessing into www.vigorpro.com to finish the activation of the account and the router. Authentication Message As for authentication information of web filter, the process of authenticating will be displayed on this field for your reference. Vigor2860 Series User’s Guide...
Page 338: Diagnostics
Below shows the successful activation of Web Content Filter: Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router. Below shows the menu items for Diagnostics. Vigor2860 Series User’s Guide...
Page 339: Dial-Out Triggering
(e.g., PPPoE) is triggered by a package sending from the source IP address. Available settings are explained as follows: Item Description Decoded Format It shows the source IP address (local), destination IP (remote) address, the protocol and length of the package. Refresh Click it to reload the page. Vigor2860 Series User’s Guide...
Page 340: Routing Table
Click Diagnostics and click Routing Table to open the web page. Available settings are explained as follows: Item Description Refresh Click it to reload the page. Vigor2860 Series User’s Guide...
Page 341: Arp Cache Table
IPv6 address. This information is helpful in diagnosing network problems, such as IP address conflicts, etc. Click Diagnostics and click IPv6 Neighbour Table to open the web page. Available settings are explained as follows: Item Description Vigor2860 Series User’s Guide...
Page 342: Dhcp Table
It displays the IP address assigned by this router for specified PC. MAC Address It displays the MAC address for the specified PC that DHCP assigned IP address for it. Leased Time It displays the leased time of the specified PC. Vigor2860 Series User’s Guide...
Page 343: Nat Sessions Table
It indicates the temporary port of the router used for NAT. Peer IP:Port It indicates the destination IP address and port of remote host. Interface It displays the representing number for different interface. Refresh Click it to reload the page. Vigor2860 Series User’s Guide...
Page 344: Ping Diagnosis
Use the drop down list to choose the destination that you want to ping. IP Address Type the IP address of the Host/IP that you want to ping. Ping IPv6 Address Type the IPv6 address that you want to ping. Vigor2860 Series User’s Guide...
Page 345: Data Flow Monitor
Flow Monitor. If not, a notification dialog box will appear to remind you enabling it. Click Diagnostics and click Data Flow Monitor to open the web page. You can click IP Address, TX rate, RX rate or Session link for arranging the data display. Vigor2860 Series User’s Guide...
Page 346 Peak means the highest peak value detected by the router in data transmission. Speed means line speed specified in WAN>>General Setup. If you do not specify any rate at that page, here will display Auto for instead. Vigor2860 Series User’s Guide...
Page 347: Traffic Graph
WAN1/WAN2/WAN3Bandwidth chart, the numbers displayed on vertical axis represent the numbers of the transmitted and received packets in the past. For Sessions chart, the numbers displayed on vertical axis represent the numbers of the NAT sessions during the past. Vigor2860 Series User’s Guide...
Page 348: Trace Route
Available settings are explained as follows: Item Description IPv4 / IPv6 Click one of them to display corresponding information for Trace through Use the drop down list to choose the interface that you want to ping through. Vigor2860 Series User’s Guide...
Page 349: Web Firewall Syslog
Click this link to save the data as a file. Click this link to refresh this page manually. Refresh Clear Click this link to clear information on this page. Display Mode There are two modes for you to choose. Vigor2860 Series User’s Guide...
Page 350: Tspc Status
Display the information for each event. IPv6 TSPC status web page could help you to diagnose the connection status of TSPC. If TSPC has configured properly, the router will display the following page when the user connects to tunnel broker successfully. Vigor2860 Series User’s Guide...
Page 351: External Devices
From this web page, check the box of External Device Auto Discovery. Later, all the available devices will be displayed in this page with icons and corresponding information. You can change the device name if required or remove the information for off-line device whenever you want. Vigor2860 Series User’s Guide...
Page 352: Access Point Devices
When you finished the configuration, click OK to save it. Note: Only DrayTek products can be detected by this function. Vigor2860 can be treated as a server, named APM server, which manages access point devices. Basically, Vigor2860 can manage up to 5 devices (Access Point, treated as a client) at one time.
Page 353 AP devices. The WLAN profile can be used for connected Vigor Access Point only. Available settings are explained as follows: Item Description Set to Factory Default Clear all of the settings and return to factory default Vigor2860 Series User’s Guide...
Page 354 Selected Device – This field will display the access point which will be applied with the WLAN profile. Choose one of the devices from the Existing Device and click to move it to the right field of Selected Device. Vigor2860 Series User’s Guide...
Page 355 WMM – To apply WMM parameters for wireless data transmission, please click the Enable radio button. Tx Power - The default setting is the maximum (100%). Lower down the value may degrade range and throughput of wireless. Vigor2860 Series User’s Guide...
Page 356 Isolate – From LAN - Check this box to make the wireless clients (stations) with the same SSID not accessing for wired PC in LAN. Isolate – From Member - Check this box to make the Vigor2860 Series User’s Guide...
Page 357 Delete –Delete the selected MAC address in the list. Edit –Edit the selected MAC address in the list. Cancel - Give up the access control set up. Bandwidth Limit Status – Click Enable to enable the function of bandwidth limit. Vigor2860 Series User’s Guide...
Page 358 Cancel the setting configured on this page. Finish Complete the configuration of this page. 4. Continue to type the required information on this page. When you finished the configuration, click Finish. A new WLAN profile has been created as follows. Vigor2860 Series User’s Guide...
Page 359: Tutorials And Applications
TSPC, AICCU, DHCPv6 Client and Static IPv6. Access into the web user interface of Viogr2860. Open WAN>> Internet Access. Choose one of the WAN interfaces as the one supporting IPv6 service. Then, click the IPv6 button of the selected WAN. Vigor2860 Series User’s Guide...
Page 360 PPP – Dual Stack application, IPv4 and IPv6 services can be utilized at the same time Choose PPP and type the information for PPPoE of IPv4. Access into the setting page for IPv6 service, it is not necessary for you to configure anything. Vigor2860 Series User’s Guide...
Page 361 Click OK and open Online Status. If the connection is successful, you will get the IP address for IPv4 and IPv6 at the same time. Vigor2860 Series User’s Guide...
Page 362 (In the following figure, the TSPC information is obtained from http://gogo6.com/ after applied for the service.) Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor2860 Series User’s Guide...
Page 363 (In the following figure, the AICCU information is obtained from https://www.sixxs.net/main/ after applied for the service.) Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor2860 Series User’s Guide...
Page 364 DHCPv6 Client Choose DHCPv6 Client. Click one of the identity associations and type the IAID number. Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor2860 Series User’s Guide...
Page 365 Static IPv6 Choose Static IPv6. Type IPv6 address, Prefix Length and Gateway Address. Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor2860 Series User’s Guide...
Page 366 In the field of HCPv6 Server Configuration, when DHCPv6 service is enabled, you can assign available IPv6 address for the client manually. Note: When both mechanisms are enabled, the client can determine which mechanism to be used (e.g., the default mechanism for Windows7 is RADVD). Vigor2860 Series User’s Guide...
Page 367 IPv4 IP and IPv6 IP services. Its IPv6 address is seen with a format of 2001:200:dff:fff1:216:3eff:feb1:44d7. After getting the above message, it means the IPv6 service has been activated successfully. Vigor2860 Series User’s Guide...
Page 368 If not, only a steady turtle will be seen. If you can see a turtle dancing on the screen, that means IPv6 service is ready for you to access and utilize. Vigor2860 Series User’s Guide...
Page 369: How To Establish Openvpn - Host To Lan Tunnels(Authenticated Without Ca) Via Smartvpn Client
(Main Office) and notebook (Remote User). The OpenVPN settings for both ends shall be the same. Otherwise, the VPN connection is unable to establish successfully. Note: Before configuring settings for OpenVPN, you should install SmartVPN Client 4.1.0.1 on your PC and latest firmware version on your Vigor router. Vigor2860 Series User’s Guide...
Page 370: Openvpn General Setup
OpenVPN setting with disabled Certificate Authentication. Click OK to save the settings. Open VPN and Remote Access >> Remote Dial-in User to create a profiles for Dial-in User. Set the Username (e.g., jos) and Password (e.g., jos) for OpenVPN. Click OK to save the settings. Vigor2860 Series User’s Guide...
Page 371 200.200.200.200) as VPN Server IP. Set jos/jos as the User Name/Password. Click OpenVPN as the type of VPN and click OK to display the OpenVPN Setting dialog. Configure the Port number, Cipher methods and Authentication as the settings defined above. Then click OK. Vigor2860 Series User’s Guide...
Page 372 Access into the web user interface of Vigor router. Open VPN and Remote Access>>Connection Management to check the VPN connection status. From the following figure, we can know that the remote user can access the Vigor router's LAN successfully by using the username/password (jos/jos). Vigor2860 Series User’s Guide...
Page 373: How Can I Get The Files From Usb Storage Device Connecting To Vigor Router
Plug the USB device to the USB port on the router. Make sure Disk Connected appears on the Connection Status as the figure shown below: Then, please open USB Application >> USB General Settings to enable Samba service. Vigor2860 Series User’s Guide...
Page 374 "user1" and assign authorities “Read”, “Write” and “List” to it. Click OK to save the configuration. Make sure the FTP service is running properly. Please open a browser and type ftp://192.168.1.1. Use the account "user1" to login. Vigor2860 Series User’s Guide...
Page 375 Now, users in LAN of Vigor2710 can access into the USB storage device by typing ftp://192.168.1.1 on any browser. They can add or remove files / directories, depending on the Access Rule for FTP account settings in USB Application >>USB User Management. Vigor2860 Series User’s Guide...
Page 376: (Main Mode)
(in this case, type VPN Server), and check the box of Enable This Profile. For Vigor router will be set as a server, the call direction shall be set as Dial-in and set 0 as Idle Timeout. Vigor2860 Series User’s Guide...
Page 377 (e.g., 218.242.130.19 in this case). Press the IKE Pre-Shared Key button to set the PSK; and select Medium (AH) or High (ESP) as the security method. Continue to navigate to the TCP/IP Network Settings for setting the LAN IP for remote side. Click OK to save the settings. Vigor2860 Series User’s Guide...
Page 378 (in this case, type VPN Client), and check the box of Enable This Profile. For such Vigor router will be set as a client, the call direction shall be set as Dial-out. Check the box of Always on for a permanent VPN connection. Vigor2860 Series User’s Guide...
Page 379 IKE Pre-Shared Key button to set the PSK; and select Medium (AH) or High (ESP) as the security method. Continue to navigate to the TCP/IP Network Settings for setting the LAN IP for the remote side. Click OK to save the settings. Vigor2860 Series User’s Guide...
Page 380: How To Optimize The Bandwidth Through Qos Technology
Internet connection line? The advanced bandwidth management technology-QoS (Quality of Service) helps you to well allocate the bandwidth upon your demand of Voice, Video, or Data transferring. Let's see how to get the optimum bandwidth per your request by using DrayTek Vigor router as below.
Page 381 In the pop-up window, choose Range Address as the Address Type and type the start IP address and end IP address in relational fields. Click OK to save the settings and exit the window. Click OK again to save the settings. Vigor2860 Series User’s Guide...
Page 382 The class rule for VoIP has been set. Click OK to return to previous page. Do the same steps to add class rules for IPTV and Data/Email with IP addresses as shown below. Vigor2860 Series User’s Guide...
Page 383 10. In the Setup page, check the box of Enable the QoS Control. Type 30, 50 and 15 in the boxes for VoIP, IPTV and Data/Email respectively. Check the box of Enable UDP Bandwidth Control. 11. Click OK to save the settings. The class rules for WAN1 are defined as shown below. Vigor2860 Series User’s Guide...
Page 384: Qos Setting Example
Note: The rate of outbound/inbound must be smaller than the real bandwidth to ensure correct calculation of QoS. It is suggested to set the bandwidth value for inbound/outbound as 80% - 85% of physical network speed provided by ISP to maximize the QoS performance. Vigor2860 Series User’s Guide...
Page 385 E-mail using protocol POP3 and SMTP. Click OK to save the settings. Return to previous page. Enter the Name of Index Class 2 by clicking Edit link. In this index, the user will set reserved bandwidth for HTTPS. And click OK. Vigor2860 Series User’s Guide...
Page 386 If the worker has connected to the headquarter using host to host VPN tunnel. (Please refer to Chapter 3 VPN for detail instruction), he may set up an index for it. Enter the Class Name of Index 3. In this index, he will set reserved bandwidth for 1 VPN tunnel. Vigor2860 Series User’s Guide...
Page 387 11. Click Add to open the following window. Check the ACT box, first. 12. Then click Edit of Local Address to set a worker’s subnet address. Click Edit of Remote Address to set headquarter’s IP address. Leave other fields and click OK. Vigor2860 Series User’s Guide...
Page 388: How To Implement The Ldap/Ad Authentication For User Management
Create LDAP server profiles. Click the Active Directory /LDAP tab to open the profile web page and click any one of the index number link. If we have two groups “RD1” and “SHRD” on LDAP server, we can configure two LDAP server profiles with different Group Distinguished Name. Vigor2860 Series User’s Guide...
Page 389 Click OK to save the settings above. Open User Management>>General Setup. Select User-Based as the Mode option. Vigor2860 Series User’s Guide...
Page 390 Then open VPN and Remote Access>>PPP General Setup to check the profile(s) that will be authenticated with LDAP server. After above configurations, users belong to either “rd1” or “shrd” group can access Internet after inputting their credentials on LDAP server. Vigor2860 Series User’s Guide...
Page 391: How To Use Landing
Landing Page is a special feature configured under User Management. It can specify the message, content to be seen or specify which website to be accessed into when users try to access into the Internet by passing the authentication. Here, we take Vigor2860 series router as an example.
Page 392 Open any browser (e.g., FireFox, Internet Explorer). The logging page will appear and asks for username and password. Please type the correct username and password. Click Login. If the logging is successful, you will see the message of Login Success from the browser you use. Vigor2860 Series User’s Guide...
Page 393 Next, enable the Landing Page function. Open User Management -> User Profile and click one of the index number (e.g., index number 3) links. In the following page, check the box of Landing page and click OK to save the settings. Vigor2860 Series User’s Guide...
Page 394 Open any browser (e.g., FireFox, Internet Explorer). The logging page will appear and asks for username and password. Please type the correct username and password. Click Login. If the logging is successful, you will be directed into the website of www.draytek.com. Vigor2860 Series User’s Guide...
Page 395: How To Send Out Sms Via Vigor Router
Username and Password that you apply for SMS; type the telephone number that you want to receive the SMS in the field of Destination Number; type the total number of the messages that the router will send out in the field of Quota; type the shortest time Vigor2860 Series User’s Guide...
Page 396 SMS notification just for once. The Send a test Message button allows you to send one SMS to the user just for test. 4. Now, a new SMS proifle has been created. 5. Go to WAN>>General Setup. In this case, choose the WAN2 link as an example. Vigor2860 Series User’s Guide...
Page 397 WAN for connection instead and send SMS to notify the user (destination number #123456789). However, if there is no available WAN for connection, the system will send SMS to inform the user after reconnecting WAN2 successfully. Vigor2860 Series User’s Guide...
Page 398: How To Create An Account For Myvigor
The website of MyVigor (a server located on http://myvigor.draytek.com) provides several useful services (such as Anti-Spam, Web Content Filter, Anti-Intrusion, and etc.) to filtering the web pages for the sake of protecting your system. To access into MyVigor for getting more information, please create an account for MyVigor.
Page 399 2. Click the Activate link. A login page for MyVigor web site will pop up automatically. 3. Click the link of Create an account now. 4. Check to confirm that you accept the Agreement and click Accept. Vigor2860 Series User’s Guide...
Page 400 5. Type your personal information in this page and then click Continue. 6. Choose proper selection for your computer and click Continue. Vigor2860 Series User’s Guide...
Page 401 8. Check to see the confirmation email with the title of Letter from myvigor.draytek.com. 9. Click the Activate my Account link to enable the account that you created. The following screen will be shown to verify the register process is finished. Please click Login. Vigor2860 Series User’s Guide...
Page 402: Create An Account Via Myvigor Web Site
11. Now, click Login. Your account has been activated. You can access into MyVigor server to activate the service (e.g., WCF) that you want. 1. Access into http://myvigor.draytek.com. Find the line of Not registered yet?. Then, click the link Click here! to access into next page.
Page 403 2. Check to confirm that you accept the Agreement and click Accept. 3. Type your personal information in this page and then click Continue. 4. Choose proper selection for your computer and click Continue. Vigor2860 Series User’s Guide...
Page 404 6. Check to see the confirmation email with the title of Letter from myvigor.draytek.com. 7. Click the Activate my Account link to enable the account that you created. The following screen will be shown to verify the register process is finished. Please click Login. Vigor2860 Series User’s Guide...
Page 405 UserName and Password. Then type the code in the box of Auth Code according to the value displayed on the right side of it. Now, click Login. Your account has been activated. You can access into MyVigor server to activate the service (e.g., WCF) that you want. Vigor2860 Series User’s Guide...
Page 406: How To Setup Address Mapping
Both WAN connections are active and the WAN1 connection has 3 IP addresses. Log into the web user interface of Vigor2860. Open WAN>>Internet Access. For WAN1, choose Static or Dynamic IP as the Access Mode. Vigor2860 Series User’s Guide...
Page 407 IP address 192.168.1.11 is to be presented to the Internet as 172.17.1.57 and the computers with a block of IP addresses from 192.168.1.16 through 192.168.1.31 are to be presented as 172.17.1.55. Click OK to save the settings. Vigor2860 Series User’s Guide...
Page 408 But you still have to specify the outgoing interface for them. Otherwise, the traffic may be routed out with IP address 172.17.1.55 or 172.17.1.57 through WAN2 port. The load-balance policies are below. Vigor2860 Series User’s Guide...
Page 409 Click OK to save the settings. The load-balance policy has been configured properly. 10. Now, you bind some specific computers to some WAN IP alias for outgoing traffic. For incoming traffic, you still have to open the relevant ports by using Port Redirection, DMZ or Open Ports functions. Vigor2860 Series User’s Guide...
Page 410: How To Configure Certain Computers Accessing To Internet
Firewall>>Filter Setup is used as the default setting, we has to create a new rule starting from Filter Rule 2 of Set 2. Access into the web user interface of Vigor router. Open Firewall>>Filter Setup. Click the Set 2 link and choose the Filter Rule 2 button. Vigor2860 Series User’s Guide...
Page 411 Next, set another rule. Just open Firewall>>Filter Setup. Click the Set 2 link and choose the Filter Rule 3 button. Check the box of Check to enable the Filter Rule. Type the comments (e.g., open_ip). Click the Edit button for Source IP. Vigor2860 Series User’s Guide...
Page 412 End IP. Then, click OK to save the settings. The computers within the range can access into the Internet. Now, check the content of Source IP is correct or not. The action for Filter shall be set with Pass Immediately. Then, click OK to save the settings. Vigor2860 Series User’s Guide...
Page 413 Both filter rules have been created. Click OK. Now, all the settings are configured well. Only the computers with the IP addresses within 192.168.1.10 ~ 192.168.1.20 can access to Internet. Vigor2860 Series User’s Guide...
Page 414: Content Filter
*How to Register AI/AV/AS/WCF Service (Service Activation Wizard) (http://www.draytek.com/user/SupportFAQDetail.php?ID=1955) *How to Activate Anti-Virus/Anti-Intrusion/Anti-Spam Service (http://www.draytek.com/user/SupportFAQDetail.php?ID=286 ) How to use the Web Content Filter (WCF) (http://www.draytek.com/user/SupportFAQDetail.php?ID=1953) * What the Web Content Filter (WCF) license benefits are, (http://www.draytek.com/user/PdInfoDetail.php?Id=110) Vigor2860 Series User’s Guide...
Page 415 Open CSM >> Web Content Filter Profile to create a WCF profile. Check Social Networking with Action, Block. Enable this profile in Firewall>>General Setup>>Default Rule. Next time when someone accesses facebook via this router, the web page would be blocked and the following message would be displayed instead. Vigor2860 Series User’s Guide...
Page 416 In the field of Contents, please type facebook. Configure the settings as the following figure. Open CSM>>URL Content Filter Profile. Click an index number to open the setting page. Configure the settings as the following figure. When you finished the above steps, click OK. Then, open Firewall>>General Setup. Vigor2860 Series User’s Guide...
Page 417 B. Disallow users to play games on Facebook Open Object Settings>>Keyword Object. Click an index number to open the setting page. In the field of Contents, please type apps.facebook. Configure the settings as the following figure. Vigor2860 Series User’s Guide...
Page 418 When you finished the above steps, please open Firewall>>General Setup. Click the Default Rule tab. Choose the profile just configured from the drop down list in the field of URL Content Filter. Now, users cannot open any web page with the word “facebook” inside. Vigor2860 Series User’s Guide...
Page 419: Trouble Shooting
Turn on the router. Make sure the ACT LED blink once per second and the correspondent LAN LED is bright. If not, it means that there is something wrong with the hardware status. Simply back to “1.3 Hardware Installation” to execute the hardware installation again. And then, try again. Vigor2860 Series User’s Guide...
Page 420 Go to Control Panel and then double-click on Network Connections. Right-click on Local Area Connection and click on Properties. Select Internet Protocol (TCP/IP) and then click Properties. Vigor2860 Series User’s Guide...
Page 421 Select Obtain an IP address automatically and Obtain DNS server address automatically. Double click on the current used Mac OS on the desktop. Open the Application folder and get into Network. On the Network screen, select Using DHCP from the drop down list of Configure IPv4. Vigor2860 Series User’s Guide...
Page 422: Pinging The Router From Your Computer
Open the Application folder and get into Utilities. Double click Terminal. The Terminal window will appear. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear. Vigor2860 Series User’s Guide...
Page 423: Checking If The Isp Settings Are Ok Or Not
PIN code and try again. If it still fails, it might be the compliance problem of system. Please open DrayTek Syslog Tool to capture the connection information (WAN Log) and send the page (similar to the following graphic) to the service center of DrayTek.
Page 424: Backing To Factory Default Setting If Necessary
Go to System Maintenance and choose Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click Reboot Now. After few seconds, the router will return all the settings to the factory settings. Vigor2860 Series User’s Guide...
Page 425: Contacting Your Dealer
After restore the factory default setting, you can configure the settings for the router again to fit your personal request. If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@DrayTek.com. Vigor2860 Series User’s Guide...

Draytek Vigor2860 Series User Manual

Quick Links

Related Manuals for Draytek Vigor2860 Series

Summary of Contents for Draytek Vigor2860 Series