Draytek Vigor2860 Series User Manual page 645

-F
-q
-l
-E
-a<index>
-u<index>
<source_port__value> –
1 – Port OP, range is 0-3. 0:= =, 1:!=, 2:>, 3:<
3 – Port range of the Start Port Number, range is
1-65535.
5 – Port range of the End Port Number, range is
1-65535.
<destination_port_value>:
2 – Port OP, range is 0-3, 0:==, 1:!=, 2:>, 3:<
4 – Port range of the Start Port Number, range is
1-65535.
6 – Port range of the End Port Number, range is
1-65535.
It means the Filter action you can specify.
0 –Pass Immediately,
1 – Block Immediately,
2 – Pass if no further match,
3 – Block if no further match.
It means the classification for QoS.
1– Class 1,
2 – Class 2,
3 – Class 3,
4 – Other
It means load balance policy.
Such function is used for "debug" only.
It means to enable APP Enforcement.
It means to specify which APP Enforcement profile will
be applied.
<index> – Available settings range from 0 ~ 32. "0"
means no profile will be applied.
It means to specify which URL Content Filter profile will
be applied.
631
Vigor2860 Series User's Guide