Telnet Command: User - Draytek Vigor2860 Series User Manual

IP address
on/off/any
[idx][ip address] [mask]
E E x x a a m m p p
> wol fromWan on
> wol fromWan_Setting 1 192.168.1.45 255.255.255.0
>
T e l n e t C o m m
T e l n e t C o m m
The command is used to create new user account profiles.
User set [-e|-d|-c|-l|-o|-a|-r|-b]
user edit [PROFILE_IDX] [-e|-d|-n|-p|-t|-u|-i|-q|-r|-w|-s|-m|-x|-v]
user account [USER_NAME] [-t|-d|-q|-r|-w]
S S y y n n t t a a x x
Parameter
set
Vigor2860 Series User's Guide
It means the LAN IP address of the host. If you want to
wake up LAN host by using IP address, be sure that that
IP address has been bound with the MAC address (IP
BindMAC).
It means to enable or disable the function of WOL from
WAN.
on: enable
off: disable
any: It means any source IP address can pass through
NAT and wake up the LAN client.
This command will allow the user to choose whether
WoL packets can be passed from the Internet to the
LAN network from a specific WAN interface.
It means the index number (from 1 to 4).
These commands will allow the user to configure the
LAN clients that the user may wake up from the Internet
through the use of the WoL packet.
ip address - It means the WAN IP address.
mask - It means the mask of the IP address.
l l e e
a n d : u s e r
a n d : u s e r
D D e e s s c c r r i i p p t t i i o o n n
Description
It means to configure general setup for the user
management.
770