Draytek Vigor2860 Series User Manual page 714

-c <comment>
-i <local ip>
-w <idx>
-p <protocol>
-s<start port>
-e<end port>
-v
-r <remove>
-f <flush>
E x a m p
E x a m p
> srv nat openport 1 1 -a 1 -c games -i 192.168.1.100 -w 1 -p TCP -s
23 -e 83
> srv nat openport -v
%% Status: Enable
%% Comment: games
%% Private IP address: 192.168.1.100
Index
*****************************************************************
Vigor2860 Series User's Guide
0: disable
1:enable
It means to type the description (less than 23
characters) for the defined network service.
It means to set the IP address for local computer.
Local ip: Type an IP address in this field.
It means to specify the public IP.
1: WAN1 Default,
2: WAN1 Alias 1,
Specify the transport layer protocol.
Available values are TCP, UDP and ALL.
It means to specify the starting port number of the
service offered by the local host. The range is from 0 to
65535.
It means to specify the ending port number of the
service offered by the local host.
The range is from 0 to 65535.
It means to display current settings.
It means to delete the specified open port setting.
remove: Type the index number of the profile.
It means to return to factory settings for all the open
ports profiles.
l e
l e
Protocal
...and so on.
Start Port End Port
700