Setting The Cabinet Type; Setting The Date And Time; Optional) Setting Independent Deployment Ai/Di Unit Parameters - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
7.
Step 4 Log in to the app.
1.
2.
3.
----End

3.2.3 Setting the Cabinet Type

Procedure
Step 1 On the WebUI, choose Home and click Page Configuration.
Step 2 Select the Cabinet type depending on the actual condition.
Step 3 Click OK.
----End

3.2.4 Setting the Date and Time

Procedure
Step 1 After logging in to the ECC800e WebUI for the first time, set the system date to the actual
date. Path: System Settings > Time.
----End
3.2.5 (Optional) Setting Independent Deployment AI/DI Unit
Parameters
If an independent deployment AI/DI unit is configured, perform the following steps to set the
parameters.
Issue 07 (2019-12-20)
If you have set a password when enabling WiFi for the first time, you do not need to set the password
again.
Enter the password currently used for logging in to the WebUI and click Submit.
Connect the mobile phone to the network of the server.
(Optional) Start the mobile phone or pad app, choose Settings > Network Connection
on the login screen, select WiFi SSID specified on the WebUI, and enter the value of
WiFi Password specified on the WebUI for login.
On the login screen, choose Settings > Server IP Settings, and ensure that the IP
address is 192.168.245.10.
The IP address of the router should be consistent with the address of the WAN port on the ECC800e
when the router connects to the wireless network.
The user name and login password for the app are the same as those for the ECC800e
WebUI. Specify the user name, password, and verification code, and tap Login.
You cannot log in to the app and WebUI at the same time.
Copyright © Huawei Technologies Co., Ltd.
3 Commissioning Guide
106