Setting And Adding The Ecc800 Collector - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
Interface Introduction
Figure 4-12 Adding a device
Table 4-9 Description of the page for adding a device
Area
(1)
Management
domain
navigation tree
(2) Device
selection area
(3)
Management
domain
(4) Device
(5) Parameter
setting area
(6) Save

4.7.3 Setting and Adding the ECC800 Collector

The requirements for ECC800 WebUI login are as follows.
Computer operating system: Windows 7 or later supported
Browser: Chrome, Firefox, Internet Explorer 11 or later
Issue 02 (2022-12-15)
Operation
In the management domain navigation tree, select the
management domain to which the device to be added
belongs.
Click the Device tab, select a device type from the drop-down
list box, and click the device to be added.
Drag the selected device to the management domain.
Click the device. The parameter setting area is displayed in the
right pane.
Set device parameters in the parameter setting area.
Click Save. The device is added.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Commissioning Core Devices
60