Replacing A T/H Sensor - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 4-23 Securing a VCN540
Step 4 Reconnect the cables to the new VCN540.
Step 5 Turn on the power switch of the VCN540.
Step 6 On the WebUI of the ECC800, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 7 Commissioning the VCN540. If the video recording function works properly after
commissioning, the VCN540 is functional.
----End

4.5.3.12 Replacing a T/H Sensor

Prerequisites



Procedure
Step 1 Open the front door of the cabinet.
Step 2 Remove cables from the T/H sensor.
Step 3 Remove the T/H sensor from its base.
Issue 07 (2019-12-20)
For details about how to commission the VCN540, see FusionModule2000 Smart Modular Data Center
V500R003C10 Commissioning Guide.
Recommended tools: Phillips screwdriver, flat-head screwdriver
The T/H sensor needs to be replaced.
A spare T/H sensor of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
196