FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-36 Installing a camera mounting plate
Step 4 Connect the camera monitoring cable. Connect one end of the network cable to the RJ45 port
on the camera and the other end to the RJ45 port on the LAN switch.
Device cables not mentioned in the document do not need to be connected onsite and should
be insulated only.
Step 5 Before installing the inner cover, adjust the infrared light panel of the camera to keep the
photoresistor vertical with the camera base, as shown in
blockage of the infrared light and photoresistor.
Issue 07 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
Figure
2-37. This prevents the
2 Installation
52