Huawei FusionModule500 User Manual page 37

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-6 Removing the cabinet from the shipment pallet

At least three or four persons are required to move a battery pack as it is very heavy.

Place the two casters at the same side panel to the ground, avoid single casters to support
the whole cabinet, and then remove the shipment pallet from the back of the ground panel.
Step 2 Slightly raise the anchor bolts using an adjustable wrench until the casters touch the floor.
Step 3 Remove the cabinet from the pallet and place it to the destination.
Step 4 Level the cabinet.
Issue 07 (2019-12-20) Copyright © Huawei Technologies Co., Ltd.
2 Installation
28