Optional) Installing The Vcn540 - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-50 Placing a VCN500
Step 3 Tighten the captive screws in the ears using a Phillips screwdriver to close the mounting ear
buttons, as shown in
Figure 2-51 Installing a VCN500
Step 4 Connect the VCN500 power cable to the appropriate rPDU.
----End

2.2.7.12 (Optional) Installing the VCN540

Context


Issue 07 (2019-12-20)
Figure
The VCN540 does not carry disks when being delivered. First install disks and then
install the device in a network cabinet.
After the VCN540 is delivered to the site, disk filler panels are installed in slots where
disks are not installed, by default. You are not advised to remove the filler panels from
Copyright © Huawei Technologies Co., Ltd.
2-51.
2 Installation
62