Replacing A Pad; Replacing The Sd Card; Replacing The Infrared Remote Control Module - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)

4.5.3.7 Replacing a Pad

Prerequisites


Procedure
Step 1 Install the APP on the reserved pad and connect the pad to the network over the WiFi hotspot
of the data center.
Step 2 Specify the user name and password for the APP on the reserved pad and log in to check that
the APP works properly.
Step 3 Remove the failure pad from the support and install the reserved pad on the support.
----End

4.5.3.8 Replacing the SD Card

Prerequisites


Procedure
Step 1 Pull out the old SD card from the ECC800e.
Step 2 Insert the new SD card into the ECC800e.
----End

4.5.3.9 Replacing the Infrared Remote Control Module

Prerequisites
A spare infrared remote control module of the same model is available and functional.
Procedure
Step 1 Remove the cables of the infrared remote control module from the T/H sensor.
Step 2 Remove the old infrared remote control module from the top of the Converged Cabinet and
replace it with a new infrared remote control module.
Step 3 Connect the cables of the new infrared remote control module to the COM_OUT port on the
T/H sensor in the Converged Cabinet.
----End
Issue 07 (2019-12-20)
Tools: ESD wrist strap, ESD gloves, labels, and marker
Materials: a reserved undamaged and undeformed pad of the appropriate model
The SD card needs to be replaced.
A spare SD card is available.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
193