FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
No.
(7)
2.3.3.2 (Optional) Connecting a Monitoring Cable to the Door Status Sensor
Prerequisites
The door status sensor has been installed.
Context
Figure 2-85
Figure 2-85 Door status sensor monitoring cable
(1) RJ45 terminal
Issue 07 (2019-12-20)
Name
DO port
shows a monitoring cable for the door status sensor.
Copyright © Huawei Technologies Co., Ltd.
Port Type
Access
Equipment
door status
switch of the
network cabinet
or battery
cabinet.
Scenario 2:
number of
cabinets > 2
Reserved
DO
Connects to a
CIM (optional).
NOTE
(2) 4-pin connector
2 Installation
Equipment
DIP Address
N/A
When a
single
battery
cabinet is
configured,
connect to a
CIM over
the DO port.
When two
battery
cabinets are
configured,
reserve the
DO port.
90