Huawei FusionModule500 User Manual page 155

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Alarm Name
Micro-Module
security certificate
has expired
NetEco certificate is
about to expire
NetEco certificate
has expired
AI/DI_1 DI Alarm
AI/DI_1 Sensor
Failure
AI/DI_1 High
Alarm
AI/DI_1 Low Alarm
AI/DI_2 DI Alarm
AI/DI_2 Sensor
Failure
AI/DI_2 High
Alarm
Issue 07 (2019-12-20)
Alarm Possible Cause
Severity
Warning The network security
certificate has expired.
The NetEco certificate is
Warning
about to expire.
Warning The NetEco certificate has
expired.
1. The onsite condition
Minor
2. The cable connection
3. The sensor is faulty.
1. The value collected by
Major
2. The sensor is not
3. The sensor is faulty.
1. The sensor is not
Minor
2. The sensor is faulty.
1. The sensor is not
Minor
2. The sensor is faulty.
Minor The same as those for the
related alarm for AI/DI_1.
The same as those for the
Major
related alarm for AI/DI_1.
Minor The same as those for the
related alarm for AI/DI_1.
Copyright © Huawei Technologies Co., Ltd.
triggers the alarm.
is unreliable.
the sensor is outside its
measurement range.
securely connected.
securely connected.
securely connected.
4 Maintenance
Solution
installed certificate is
within the validity
period.
Apply for a new network
security certificate
promptly and change the
existing one.
Apply for a NetEco
certificate promptly and
change the existing one.
Apply for a NetEco
certificate promptly and
change the existing one.
1. Check and clear the
onsite alarm.
2. Check the sensor
cable connection.
3. Replace the faulty
sensor.
1. Check that the signal
volume is not outside
the measurement
range.
2. Check the sensor
cable connection.
3. Replace the faulty
sensor.
1. Check the sensor
cable connection.
2. Replace the faulty
sensor.
1. Check the sensor
cable connection.
2. Replace the faulty
sensor.
The same as those for the
related alarm for
AI/DI_1.
The same as those for the
related alarm for
AI/DI_1.
The same as those for the
related alarm for
AI/DI_1.
146