FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-60 Installing a door status sensor
----End
2.2.7.15 (Optional) Installing a T/H Sensor
2.2.7.15.1 Installing a T/H Sensor (in the Scenario with 600 mm Wide Network Cabinet)
Procedure
Step 1 Install a T/H sensor.
1.
2.
From the cabinet front, install the T/H sensor with its network port facing leftwards.
Issue 07 (2019-12-20)
Open the front door of the network cabinet.
Install the T/H sensor base on the top of the network cabinet, push the T/H sensor into
the cabinet, and clamp the T/H sensor onto the base.
Copyright © Huawei Technologies Co., Ltd.
2 Installation
68