FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-87 T/H sensor cable route
----End
2.3.3.4 (Optional) Connecting the Infrared Remote Control Module Cable
Prerequisites
The T/H sensor in the Converged Cabinet has connected to the ECC800e.
Procedure
Step 1 Connect the RJ45 (8-pin) end of the cable to the infrared remote control module and the
non-RJ45 (6-pin) end to COM_OUT port on the T/H sensor in the Converged Cabinet.
Issue 07 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
2 Installation
93