ABB IRC5 Product Manual page 269

Removal
1
2
3
4
5
6
7
Refitting
1
Product manual - IRC5
3HAC047136-001 Revision: M
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section Make sure that the main
power has been switched off on page
Remove the moist dust filter magazine.
(Option)
Loosen the four attachment screws to the
cover.
Remove the cover.
Disconnect the connector to the fan.
If the fan is temperature sensor controlled,
disconnect the sensor as described in
placement of sensors for the drive system
fans on page 271.
Push the fan upwards and remove it.
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section Make sure that the main
power has been switched off on page
© Copyright 2004-2018 ABB. All rights reserved.
4.20 Replacement of drive system fans
Note /illustration
26.
How to remove the moist dust filter
magazine is detailed in section
ment of moist dust filter on page
Re-
xx0500002015
A Fan
B Latches
C Grooves
Note/illustration
26.
Continues on next page
4 Repair
Continued
Replace-
187.
269