Mounting The Flexpendant Holder - ABB IRC5 Product Manual

2 Installation and commissioning

2.4.4 Mounting the FlexPendant holder

2.4.4 Mounting the FlexPendant holder
Location
The placement of the FlexPendant holder is shown in the illustration below.
xx0500002542
A
B
Required equipment
Equipment
Standard tool kit
FlexPendant holder
Continues on next page
54
FlexPendant holder mounted on top of the control cabinet.
FlexPendant holder mounted on the control cabinet door.
Note
In order to avoid drop of the FlexPendant from high levels, the location of the
FlexPendant holder on top of the control cabinet is recommended only with one
single cabinet without additional drive modules. Otherwise according to location
on the control cabinet door.
Note
Do not position the FlexPendant holder so that it is an obstacle in the place of
work.
© Copyright 2004-2018 ABB. All rights reserved.
Note
The contents are defined in section,
toolkit, IRC5 on page 305
For spare parts, see Miscellaneous parts on
page 312.
3HAC047136-001 Revision: M
Standard
Product manual - IRC5