Replacement Of Ethernet Switch - ABB IRC5 Product Manual

4.25 Replacement of Ethernet switch

General
For some options an Ethernet switch is mounted in the controller.
Location
The illustration below shows the location of the Ethernet switch.
xx1300000814
B
Removing the switch
1
2
3
4
Product manual - IRC5
3HAC047136-001 Revision: M
A
Ethernet switch
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section Make sure that the main power has been switched off on page
WARNING
The unit is sensitive to ESD. Before handling the unit please read the safety information
in the section The unit is sensitive to ESD on page 34
Disconnect all connectors from the switch.
Pull the spring lock to remove the switch.
© Copyright 2004-2018 ABB. All rights reserved.
4.25 Replacement of Ethernet switch
Continues on next page
4 Repair
26.
285