Replacement Of Eps Board Dsqc 646 For Electronic Position Switches - ABB IRC5 Product Manual

4.15 Replacement of EPS board DSQC 646 for Electronic Position Switches

General
An Electronic Position Switches safety controller, EPS board, is mounted if the
option Electronic Position Switches is used.
Location
The EPS board is mounted behind the axis computer.
xx1300000810
A
B
Removal
1
Product manual - IRC5
3HAC047136-001 Revision: M
4.15 Replacement of EPS board DSQC 646 for Electronic Position Switches
Note
After replacement of the safety controller, the Electronic Position Switches
configuration must be downloaded to the new safety controller and then validated.
For more information, see Application manual - Electronic Position Switches.
EPS board
Axis computer
Action
DANGER
Before any work inside the cabinet, please
observe the safety information in section
Make sure that the main power has been
switched off on page 26.
© Copyright 2004-2018 ABB. All rights reserved.
A
B
Note/illustration
Continues on next page
4 Repair
251