Function Test Of Automatic Fuse F1 - ABB IRC5 Product Manual

3 Maintenance

3.5.11 Function test of automatic fuse F1

3.5.11 Function test of automatic fuse F1
Performing the function test
1
2
3
206
Action
Start the robot system.
To test the automatic fuse, insert a screw
driver in the test opening.
After the test, reset the automatic fuse.
© Copyright 2004-2018 ABB. All rights reserved.
Note
This test is passed if the automatic fuse is
released when inserting the screw driver
in the test opening.
If the automatic fuse did not release, the
test failed and the root cause of the failure
must be found.
Product manual - IRC5
3HAC047136-001 Revision: M