Installation Of The Option Hot Plug - ABB IRC5 Product Manual

2.9.6 Installation of the option Hot plug

Location
To be able to use the Hot plug function an additional hot plug button is needed.
The figure below shows the location of the hot plug button on the controller.
xx1300000606
A
Required equipment
Equipment
Hot plug
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures
in the step-by-step instruc-
tions below.
Circuit diagram
Product manual - IRC5
3HAC047136-001 Revision: M
A
Hot plug button
Art. no.
3HAC026225-002
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation and commissioning
2.9.6 Installation of the option Hot plug
Note
The contents are defined in sec-
tion Standard toolkit.
These procedures include refer-
ences to the tools required.
See Circuit diagrams on page
Continues on next page
325.
135