ABB IRC5 Product Manual page 281

Refitting
The following procedure details how to refit the brake resistor bleeder.
1
2
Product manual - IRC5
3HAC047136-001 Revision: M
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section Make sure that the main
power has been switched off on page
If the IRC5 controller uses an Additional
Rectifier Unit, an extra ARU bleeder is
required.
Attach the mounting brackets for ARU
bleeder on the MDU bleeder.
Attach the ARU bleeder to the MDU
bleeder.
© Copyright 2004-2018 ABB. All rights reserved.
4.23 Replacement of brake resistor bleeder
Note/illustration
26.
A
B
C
xx1000000030
• A: MDU bleeder
• B: ARU bleeder
• C: Attachment screws
• D: Mounting brackets for ARU
bleeder
Continues on next page
4 Repair
Continued
A
D
281