Message Contents - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 53 Configuring Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Severity levels range from 0 to 9, with 9 having the highest urgency. Each syslog level has keywords and
a corresponding syslog level as listed in
Call Home does not change the syslog message level in the message text. The syslog message texts in
Note
the Call Home log appear as they are described in the Cisco MDS 9000 Family System Messages Guide.
Call Home severity levels are not the same as system message logging severity levels (see
Note
"Configuring System Message Logging"
Table 53-4
Call Home Level
Catastrophic (9)
Disaster (8)
Fatal (7)
Critical (6)
Major (5)
Minor (4)
Warning (3)
Notify (2)
Normal (1)
Debug (0)

Message Contents

The following contact information can be configured on the switch:
•
•
•
•
•
•
Table 53-5
Table 53-5
Data Item
Device identification
Date/time stamp
OL-18084-01, Cisco MDS NX-OS Release 4.x
Severity and Syslog Level Mapping
Keyword Used Syslog Level
Catastrophic
Disaster
Fatal
Critical
Major
Minor
Warning
Notification
Normal
Debugging
Name of the contact person
Phone number of the contact person
E-mail address of the contact person
Mailing address to which replacement parts must be shipped, if required
Site ID of the network where the site is deployed
Contract ID to identify the service contract of the customer with the service provider
describes the short text formatting option for all message types.
Short Text Messages
Table 53-4.
and the Cisco MDS 9000 Family System Messages Guide).
Description
N/A Network wide catastrophic failure.
N/A Significant network impact.
Emergency (0) System is unusable.
Alert (1) Critical conditions, immediate attention needed.
Critical (2) Major conditions.
Error (3) Minor conditions.
Warning (4) Warning conditions.
Notice (5) Basic notification and informational messages.
Possibly independently insignificant.
Information (6) Normal event signifying return to normal state.
Debug (7) Debugging messages.
Description
Configured device name
Time stamp of the triggering event
Cisco MDS 9000 Family CLI Configuration Guide
Message Contents
Chapter 52,
53-33