Overview Of The Logiq E9 Ultrasound Scanner; History - Hardware/Software Versions; History - Peripherals/Software Versions; Frus For Back End Processor - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
1-2-5-2

Overview of the LOGIQ E9 ultrasound scanner

The LOGIQ E9 ultrasound unit is a high performance digital ultrasound imaging system with total data
management.
The system provides image generation in B-Mode, Color Doppler, Power Doppler, M-Mode,
Color M-Mode, PW and 4D, Tissue Velocity imaging, Volume-Guided Ultrasound and Contrast
applications. The fully digital architecture of the LOGIQ E9 unit allows optimal usage of all scanning
modes and probe types throughout the full spectrum of operating frequencies.
Signal flows from the Probe Connector Panel to the Fr o nt End, and then over to the Back End Processor
and finally to the monitor and peripherals.
System configuration is stored on the hard drive in the Back End Processor.
All necessary software is loaded from the hard drive on power up.
1-2-5-3

History - hardware/software versions

Refer to
1-2-5-4

History - peripherals/software versions

Refer to
1-2-5-5

FRUs for Back End Processor

Refer to
1-2-5-6

History - supported probes

Refer to
1-2-5-7

How to turn the scanner ON and OFF

• To turn the scanner ON see:
• To turn the scanner OFF see:
1-2-5-8

How to check for hardware/software version and installed options

• To verify the hardware versions on the boards, refer to
hardware/software compatibility" on page
• Refer to
local software on the boards.
• Refer to
1-2-5-9

Purpose of the operator manual(s)

The operator manuals should be fully read and understood before operating the LOGIQ E9.
The online versions of the operator manuals are available via the Help function on LOGIQ E9's operator
panel.
1 - 6
PROPRIETARY TO GE
. 7
EV
Section 9-6 "Software" on page
Section 9-15 "Peripherals" on page
Section 9-13 "Back End Processor (BEP) parts" on page
Section 9-18 "Probes" on page
4-4-1 "Software Configuration Checks" on page 4-53
Section 4-3 "Functional checks" on page 4-34
Section 1-2 - Service manual overview
9-6.
9-83.
9-112.
4-2-4 "Power shut down" on page
4-2-5 "Top Console position adjustment" on page
9-5.
LOGIQ E9 P
ROPRIETARY
9-72.
4-7.
Section 9-5 "LOGIQ E9 Models and
to check the software versions on
to check for installed options.
S M
ERVICE ANUAL
4-10.