Configuring Request For Service (Rfs); Select Default Machine Contact; Request For Service Setting On System Admin Page; Remote Check And Configuration - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-11-4-3

Configuring Request for Service (RFS)

To configure the LOGIQ E9 to enable the customer to submit an RFS,
1.) Position the Windows pointer on top of the GE InSite ExC icon at the bottom of the display.
2.) Press the right Trackball Set key. This opens the RFS screen.
3.) Select the Users tab and type the site's Contact Name. Manual and machine-generated RFS
requests are directed to this person. Items with red asterisks are required fields and must be filled
in.
4.) Click on Set Default Machine contact.
Figure 3-36 Select Default Machine Contact
NOTE: Machine-generated RFS is the system default. If you wish to disable RFS, remove the
checkmark at Automatic Request for Service via Utility -> Admin -> System Admin.
Figure 3-37 Request for Service Setting on System Admin Page
3-11-4-4

Remote Check and Configuration

Contact the OnLine Center for InSite Checkout confirmation.
3 - 92
PROPRIETARY TO GE
. 7
EV
Section 3-11 - Configuring Insite ExC
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL