Capturing Network Logs With Network Sniffer (Software R2.X.x Or Later); Network Sniffer Screen; Sniffer Captions Options - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-3-7

Capturing Network Logs with Network Sniffer (Software R2.x.x or later)

Wireshark is a new network sniffer program that replaces Distinct in R2.x.x or later. Functionality is
similar from previous software.
Logs collected should be stored under d:/log/Sniffer folder to ensure they form part of general log
collection Alt+D or Collect Log.
1.) Press Alt+N.
2.) On the network sniffer screen, select Capture -> Options.
3.) Select the interface that will be receiving packets (Network card A or Wireless B).
NOTE: Remember, if the device has a DVR, it will show up in the list. Select either Intel Network
connection or the Wireless network adapter.
If you are working with a Wireless connection, you must uncheck the "Capture packets in promiscuous
mode"; the wireless option does not support this mode.
7 - 14
PROPRIETARY TO GE
. 7
EV
Figure 7-12 Network Sniffer Screen
Figure 7-13 Sniffer Captions Options
Section 7-3 - Gathering Troubleshooting Data
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL