Audio (Sound); Audio Window - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-5-16-3

Audio (Sound)

See:
7-5-7 "Diagnostics Window Overview" on page 7-30
1.) Click the Execute button at the bottom of the screen. Wait approximately 30 seconds for the first
test screen to open.
2.) Click Left Front and R ight Front buttons to test your speakers. You should hear a recorded message
from each speaker.
3.) Click on the Beep button. You should hear a low "beep" from your PC.
4.) If all work, click the Pass button. Click the Close button.
5.) Do not perform the Microphone Interactive Test. Click the Close button.
6.) To test the WAV sound reproduction, click Left Channel, Right Channel, or Both Channels to test
your speakers. You should hear a guitar chord.
7.) Click on the Beep button. You should hear a low "beep" from your PC.
8.) Click the Close button.
9.) When you return to the Audio Test screen, click the Abort button.
10.)After closing the Service screen, you may see a Runtime Error screen(s). Close the screen(s).
11.)Before returning the system to the customer, always remember to reboot.
12.)If no sound is produced in these tests, choose the More Info button in the Audio Test dialog box for
information about possible causes and solutions.
PROPRIETARY TO GE
. 7
EV
Figure 7-91 Audio Window
Chapter 7 Diagnostics/Troubleshooting
LOGIQ E9 P
ROPRIETARY
for a description of this window's features.
S M
ERVICE ANUAL
7 - 129