D
5180483-100, R
IRECTION
7-6-5
How Customer Enables Disruptive Mode
Perform these steps for a customer to enable Disruptive Mode.
1.) On the Touch Screen, click on the Utilities button, then the Service button. This icon links the User
or Field Engineer (FE) to the Service Login screen shown in Figure 7-142.
NOTE:
The screen in Figure 7-142 is an example from a LOGIQ E9 Engineering system. The System
Type and/or System ID will vary between scanners and workstations.
2.) Select Operator and enter the password ULS, then click Okay.
3.) Select Utility -> Common Utilities -> Disruptive Mode (See: Figure 7-143 "Disruptive Mode
Enabled" on page 7-173).
7 - 172
PROPRIETARY TO GE
. 7
EV
Figure 7-142 Service Login Screen
Section 7-6 - Troubleshooting using InSite ExC
LOGIQ E9 P
ROPRIETARY
S
M
ERVICE
ANUAL