Customer Enables Vco - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-6-6

Customer Enables VCO

Perform these steps for a customer to enable VCO:
1.) Left click on the InSite ExC icon.
2.) Select Clinical Life Line. This will activate disruptive mode and VCO for the application OLC to
quickly assist the customer.
3.) If you select Clinical Life Line again, it will turn off disruptive mode and VCO.
4.) A Red message indicating that the system should be rebooted will remain until the system is
rebooted.
7 - 174
PROPRIETARY TO GE
. 7
EV
Section 7-6 - Troubleshooting using InSite ExC
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL