Capturing Network Logs With Network Sniffer (Software R1.X.x); Distinct Network Monitor Window; Configuration Screen - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-3-6

Capturing Network Logs with Network Sniffer (Software R1.x.x)

A sniffer monitors network traffic and allows you to capture network data without redirecting or altering it.
NOTE: If you are launching the network sniffer from the Utilities menu
Monitor R1.x.x" on page
Launch the network sniffer application one of the following two ways:
1.) On the Regular Scan Screen, press Alt+N. This launches the network sniffer application.
2.) Select Configure on the Distinct Network Monitor Window.
3.) Click on Capture Settings after selecting the Configuration pull-down menu.
4.) The Configuration screen opens.
7 - 8
PROPRIETARY TO GE
. 7
EV
7-148), you can begin with step 1 of this procedure.
Figure 7-4 Distinct Network Monitor Window
Figure 7-5 Configuration Screen
Section 7-3 - Gathering Troubleshooting Data
LOGIQ E9 P
ROPRIETARY
(7-5-21-15 "Distinct Network
S M
ERVICE ANUAL