Access Authorization; Restart Logiq E9 After Diagnostics - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-5-4 Global Service User Interface (GSUI) (cont'd)
Access / Security
The service interface has different access and security user levels. Each user is only granted access to
the tools that are authorized for their use.
Table 7-1
USER LEVEL
Operator
Administrator
External Service
GE Service
NOTE: For a GE Field Engineer, the password changes at specific intervals.
Every access request, whether successful or not, will be logged into a service access log that is
viewable to authorized users.

Restart LOGIQ E9 after diagnostics

Always shutdown the system and reboot after a diagnostics session. A red message on the task bar will
remind you that the system needs to be restarted after a diagnostic run or disruptive mode is enabled,
before it is returned for customer use.
PROPRIETARY TO GE
. 7
EV

Access Authorization

Authorized access to specified diagnostics, error logs and utilities. Same acquisition
diagnostic tests as GE Service.
Knowledge of the service level password.
Chapter 7 Diagnostics/Troubleshooting
LOGIQ E9 P
ACCESS AUTHORIZATION
S M
ROPRIETARY ERVICE ANUAL
PASSWORD
uls
uls
gogems
rotating security
password
7 - 25