Print Button Setup - R3.X And Earlier - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-9-4-3 Sending Images and Data to a DICOM Image Storage Service (cont'd)
For R4 and later, proceed to:
2.) Print Button - R3.x and earlier
The typical use for a print button is to copy to dataflow. However, the print button can be set up for image
transfer to a DICOM Image Storage service as a quick way to accomplish "direct store" to that service
without having to setup a dataflow. Each image is immediately sent to the service rather than waiting
until the exam is ended for all images to be transferred. Another use of this technique is to send existing
images directly to a PACS.
NOTE: If you plan to generate long cine loops, it is NOT recommended to use "Direct Store" (either on
the dataflow or via a print button directly) as the system response may be slow.
To setup a Print Button for this purpose, follow these steps:
Table 3-13
1.
2.
3.
3 - 52
PROPRIETARY TO GE
. 7
EV
"2.) Print Button - R4.x and later" on page

Print Button Setup - R3.x and earlier

In Utility -> Connectivity -> Button, select one of the "Physical Print Buttons."
Set Format, Image Frames, and Compression as desired. See:
Settings" on page 3-53.
Notice the list of available services to the left of the << and >> buttons. Select each DICOM
service you want to assign to your print button and press >>.
(If you don't add "Copy to Dataflow" to the print button's Printflow, you will send images directly
to the DICOM service(s) without having them stored permanently on the LOGIQ E9. With a
dataflow, the images are always stored permanently in the database of the LOGIQ E9.)
From this point on, pressing your configured print button immediately places the image on the
spooler to be sent to the service(s) assigned to the button.
NOTE: If you are using a dataflow to which one of your DICOM services is assigned, DO NOT
add that same service to a print button. If you do, two copies of each image may be sent to the
service with each press of the print button.
Section 3-9 - Connectivity Setup and Tips
LOGIQ E9 P
ROPRIETARY
3-55.
Table 3-14 "Print Button
S M
ERVICE ANUAL