Configuring Advanced Configuration; Submit Changes Response - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-11-4-2

Configuring Advanced Configuration

1.) Select PILOT2 or PRODUCTION from the Enterprise Server dropdown list. The Pilot server is
used for initial production, please check with the OLC to verify that the current server is used.
-
-
2.) Configure the Service Center settings as RPROC.
3.) Select Enable in the File Watcher field.
NOTE: File Watcher will monitor d:\export\service for R2.x.x or earlier, and d:\service for R3.x.x and
later.
NOTE: Do not change the Directory field.
4.) In the Filter field, it is recommended to set it to *.zip, so that the system will only upload zip files to
the back office. Example, Alt D logs.
5.) If a proxy is needed, select Enable from the Proxy dropdown list and enter a valid proxy server
address and port (if needed).
If proxy authentication is needed:
a.) Enable it and enter Scheme (if needed).
b.) Enter User information and Password.
6.) Save the settings from the previous steps by clicking the Submit Changes button. A page is
displayed on the CSD indicating the "agent will be restarted."
If a screen requests ok for password, select Yes. The Submit Changes screen opens.
Figure 3-34 Submit Changes Response
3 - 90
PROPRIETARY TO GE
. 7
EV
Enterprise parameters are populated for Pilot as shown below:
* Enterprise Server URL = https://198.169.188.26:443
* Enterprise Tunnel URL = https://198.169.188.27:443
Or for Production, as shown below:
* Enterprise Server URL = https://198.169.188.10:443
* Enterprise Tunnel URL = https://198.169.188.11:443
Section 3-11 - Configuring Insite ExC
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL