Packing Materials - Recycling Information; Preparing For Setup; Verify Customer Order - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
Table 3-3
12. Pull the LOGIQ E9 down the Pallet Base
13. Remove the clear plastic (wrapped around
14. Place all of the filling inside the
Section 3-4

Packing materials - recycling information

The packing materials for LOGIQ E9 are recyclable:
• The Transportation Box is made of cardboard.
• Lever lockings (hinges) are made of zinc plated steel.
• The inner reinforcements are made of Ethafoam (Polyethylene foam).
• The plastic foil is made of LDPE (Low Density Polyethylene).
Section 3-5

Preparing for setup

3-5-1

Verify Customer Order

Compare items received by the customer to that which is listed on the delivery order. Report any items
that are missing, back ordered, or damaged.
3 - 12
. 7
EV
Uncrating Instructions (Continued)
Steps
ramp.
Note: Remember to pull in the LOGIQ E9
from the back for safer transportation.
the LOGIQ E9) from the unit.
Transportation Box. Close the box, and
store the filling for possible future use.
Section 3-4 - Packing materials - recycling information
PROPRIETARY TO GE
LOGIQ E9 P
ROPRIETARY
Corresponding Graphic
S M
ERVICE ANUAL