Connections On The Patient I/O Panel; Connecting Probes; Connect Ecg; Introduction To Connecting Probes - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-6-6

Connections on the Patient I/O panel

3-6-6-1

Connect ECG

Refer to Chapter 10 in the Basic User Manual for more information.
3-6-7

Connecting Probes

3-6-7-1

Introduction to Connecting Probes

Probes can be connected at any time, whether the unit is on or off.
R3.x and earlier LOGIQ E9s have two types of probe ports: one non-DLP probe port and three DLP
probe ports (Figure 3-16). R4.x and later LOGIQ E9s have one type of probe ports: four DLP probe ports
(Figure 3-15).
The non-DLP probe port is compatible with the S1-5, S4-10, 6Tc (TEE probe), and 3CRF probe
connectors.
The three DLP probe ports are specific to the LOGIQ E9 probe connectors.
Figure 3-15 Probe connectors - (1) Non-DLP and (2) DLP Probe Port - R3.x and earlier
R4.x and later LOGIQ E9s have one type of probe ports: four DLP probe ports (Figure 3-16).
Figure 3-16 Probe connectors, four DLP Probe Ports - R4.x and Later
3 - 22
PROPRIETARY TO GE
. 7
EV
1
Section 3-6 - Completing the setup
LOGIQ E9 P
ROPRIETARY
2
S M
ERVICE ANUAL