Network “Sniffer” - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-9-14 Network "Sniffer"
The LOGIQ E9 includes a network sniffer, Wireshark, that displays network traffic between the
LOGIQ E9 and other devices. Its output can be saved in files. It is useful for debugging connectivity
issues. Usually only DICOM traffic is examined. Follow these steps:
Table 3-32
1.
2.
3.
PROPRIETARY TO GE
. 7
EV
Network "Sniffer"
Press Alt-N to display Wireshark.
In Capture/Interfaces press Options on the interface that corresponds to the LOGIQ E9 IP
address.
Make sure "Capture packets in promiscuous mode" is unchecked. Press Start.
Chapter 3 LOGIQ E9 Setup
Wireshark: Capture Interfaces
Wireshark: Capture Options
(continued on next page)
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL
3 - 81