Ivr Refresh - Cisco MDS 9000 series Command Reference Manual

ivr refresh

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ivr refresh
To refresh devices being advertised by Inter-VSAN Routing (IVR), use the ivr refresh command in
EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
2.0(2)
Usage Guidelines None.
Examples The following example shows refresh devices being advertised by IVR.
switch# ivr refresh
Related Commands Command
ivr enable
ivr withdraw domain
Cisco MDS 9000 Family Command Reference
11-128
ivr refresh
Modification
This command was introduced.
Description
Enables the Inter-VSAN Routing (IVR) feature.
Withdraws an overlapping virtual domain from a specified VSAN.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x