Cisco MDS 9000 series Command Reference Manual page 923

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example uses the switch WWN pool to allocate two pWWNs for this iSCSI initiator and
to keep it persistent.
switch(config-iscsi-init)# static pWWN system-assign 2
The following example shows a system-assigned pWWN for an iSLB initiator.
switch# config t
switch(config)# islb initiator ip-address 100.10.10.10
switch(config-islb-init)# static pwwn system-assign 4
The following example removes the system-assigned pWWN for the iSLB initiator.
switch (config-islb-init)# no static pwwn system-assign 4
Related Commands Command
iscsi initiator name
show iscsi initiator
show iscsi initiator
configured
show iscsi initiator
detail
show iscsi initiator
summary
islb initiator
show islb initiator
show islb initiator
configured
show islb initiator
detail
show islb initiator
summary
OL-8413-07, Cisco MDS SAN-OS Release 3.x
static (iSCSI initiator configuration and iSLB initiator configuration)
Description
Assigns an iSCSI name and changes to iSCSI initiator configuration
submode.
Displays information about configured iSCSI initiators.
Displays iSCSI initiator information for the configured iSCSI initiator.
Displays detailed iSCSI initiator information.
Displays iSCSI initiator summary information.
Assigns an iSLB name and IP address to the iSLB initiator and enters iSLB
initiator configuration submode.
Displays iSLB initiator information.
Displays iSLB initiator information for the specified configured initiator.
Displays detailed iSLB initiator information.
Displays iSLB initiator summary information.
Cisco MDS 9000 Family Command Reference
21-55