Debug Port-Channel - Cisco MDS 9000 series Command Reference Manual

debug port-channel

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug port-channel
To enable debugging for PortChannels, use the debug port-channel command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
demux
deque
error
event
ha
trace
warning
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug port-channel all command is issued:
switch# debug port-channel all
2005 Mar 10 03:03:26 port_channel: fu_fsm_execute_all: match_msg_id(0),
log_already_open(0)
2005 Mar 10 03:03:26 port_channel: fu_fsm_execute_all: null fsm_event_list
2005 Mar 10 03:03:26 port_channel: fu_fsm_engine_post_event_processing: mts msg
MTS_OPC_DEBUG_WRAP_MSG(msg_id 7005958) dropped
Related Commands Command
no debug all
show port-channel
Cisco MDS 9000 Family Command Reference
6-92
debug port-channel {all | error | event | ha | trace | warning}
no debug port-channel {all | error | event | ha | trace | warning}
Modification
This command was introduced.
Description
Disables all debugging.
Displays information about existing PortChannel configurations.
Enables all PortChannel debug options.
Enables debugging of PortChannel messages.
Enables debugging of PortChannel message dequeues.
Enables debugging for PortChannel error conditions.
Enables debugging for PortChannel FSMs and events.
Enables debugging for PortChannel high availability.
Enables debugging for PortChannel traces.
Enables debugging for PortChannel warning.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x