Interface Fcip - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:
Table of Contents

Advertisement

Chapter 11
I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

interface fcip

To configure a Fibre Channel over IP Protocol (FCIP) interface, use the interface fcip command. To
disable a FCIP interface, use the no form of the command.
Syntax Description
interface-number
bport
bport-keepalives
channel-group number
force
fcdomain
rcf-reject
vsan vsan-id
fspf
cost link-cost
dead-interval seconds
OL-8413-07, Cisco MDS SAN-OS Release 3.x
interface fcip interface_number
bport
bport-keepalives
channel-group number [force]
fcdomain rcf-reject vsan vsan-id
ficon portnumber portnumber |
fspf {cost link-cost | dead-interval seconds | hello-interval seconds | passive |
retransmit-interval seconds} vsan vsan-id
passive-mode
peer-info ipaddr ip-address [port number]
qos control control-value data data-value
special-frame peer-wwn pwwn-id
tcp-connections number
time-stamp [acceptable-diff number]
use-profile profile-id
interface fcip interface_number
no bport
no bport-keepalives
no channel-group number [force]
no fcdomain rcf-reject vsan vsan-id
no ficon portnumber portnumber
no fspf {cost link-cost | dead-interval seconds | hello-interval seconds | passive |
retransmit-interval seconds} vsan vsan-id
no qos control-value data data-value
no passive-mode
no peer-info ipaddr ip-address [port number]
no special-frame peer-wwn pwwn-id
no tcp-connections number
no time-stamp [acceptable-diff number]
no use-profile profile-id
Configures the specified interface from 1 to 255.
Sets the B port mode.
Sets the B port keepalive responses.
Specifies a PortChannel number from 1 to 128.
Forcefully adds a port.
Enters the fcdomain mode for this FCIP interface
Configures the rcf-reject flag.
Specifies a VSAN ID. The range is 1 to 4093.
Configures FSPF parameters.
Enters FSPF link cost. The range is 1 to 65535
Specifies the dead interval in seconds. The range is 1 to 65535.
Cisco MDS 9000 Family Command Reference
interface fcip
11-27

Advertisement

Table of Contents
loading

Table of Contents