Fcc Enable - Cisco MDS 9000 series Command Reference Manual

fcc enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcc enable
To enable Fibre Channel Congestion Control (FCC), use the fcc enable command in configuration mode.
To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example shows how to enable FCC.
switch# config terminal
switch(config)# fcc enable
Related Commands Command
show fcc
Cisco MDS 9000 Family Command Reference
8-14
fcc enable
no fcc enable
Modification
This command was introduced.
Description
Displays FCC settings.
Chapter 8 F Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x