Debug Hardware Arbiter - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug hardware arbiter

To configures debugging for the hardware arbiter driver, use the debug hardware arbiter command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description error
flow
group number
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug hardware arbiter error group
command is issued:
switch# debug hardware arbiter error group 1
Related Commands Command
no debug all
show hardware
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug hardware arbiter {error | flow} [group number]}
no debug hardware arbiter {error | flow} [group number]}
Modification
This command was introduced.
Description
Disables all debugging.
Displays switch hardware inventory details.
Enables debugging for hardware arbiter kernel errors.
Enables debugging for hardware arbiter kernel flow.
Restricts debugging to the specified group. The range is 0 to 17.
Cisco MDS 9000 Family Command Reference
debug hardware arbiter
6-59