Debug Platform - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug platform

To enable debugging for the platform manager, use the debug platform command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
all
error
flow
fsm
ha
hitless
mts
nopowerdown
supervisor-reset
fcid f c-id
pkt
pkthdr
tx
rx
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug platform {all [fc_id fc-id] | error [module slot] | flow [module slot] | fsm | ha | hitless |
mts {pkt | pkthdr} {tx | rx} | nopowerdown | supervisor-reset}
no debug platform {all [fc_id fc-id] | error [module slot] | flow [module slot] | fsm | ha | hitless |
mts {pkt | pkthdr} {tx | rx} | nopowerdown | supervisor-reset}
Enables debugging for all platform features.
Enables debugging for platform-related error conditions.
Enables debugging for platform-related flows.
Enables debugging for platform-related FSMs.
Enables debugging for platform-related high availability.
Enables the platform loading feature while the switch is in hitless mode.
Enables debugging for platform-related tx/rx MTS events.
Enables powering down modules
Resets the local supervisor.
Restricts debugging to the specified FC ID module number. The range is 0 to
2147483647.
Enables debugging of packets.
Enables debugging of headers.
Enables debugging in the transmit direction,
Enables debugging in the receive direction.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
debug platform
6-87