Debug Fdmi - Cisco MDS 9000 series Command Reference Manual

debug fdmi

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fdmi
To enable debugging for the Fabric-Device Management Interface (FDMI) feature, use the debug fdmi
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
Syntax Description
all
errors
fdmi-messages
ha
mts
pkt
both
tx
rx
node
range
opcode
sap
pkthdr
numpkt
pss
trace
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.3(2)
Usage Guidelines None.
Cisco MDS 9000 Family Command Reference
6-48
debug fdmi {all | errors | fdmi-messages [vsan vsan-id] | ha | mts {pkt {both | rx [node range |
opcode range | sap range] | tx} | pkthdr {both | tx | rx [numpkt range]}} | pss | trace}
no debug fdmi {all | errors | fdmi-messages [vsan vsan-id] | ha | mts {pkt {both | rx [node range
| opcode range | sap range] | tx} | pkthdr {both | tx | rx [numpkt range]}} | pss | trace}
Modification
This command was introduced.
Enables debugging for all FDMI features.
Enables debugging for FDMI error conditions.
Enables the dump of FDMI PDUs.
Enables the dump of HA synchronization messages.
Enables debugging for FDMI tx/rx MTS events.
Enables debugging for FCC tx/rx FCC packets.
Specifies debugging in both the transmit and receive directions.
Specifies debugging in the transmit direction,
Specifies debugging in the receive direction.
Specifies the node for the packets in the receive direction.
Specifies the integer range from 1 to 4096.
Specifies the opcode for the packets in the receive direction.
Specifies the sap for the packets in the receive direction.
Enables debugging for FCC tx/rx FCC headers.
Specifies the number of required packets
Enables debugging for FDMI PSSs.
Restricts debugging for FDMI traces.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x